 |
| Quantity: | |
|---|---|
PHA-200-01A
Piezohannas
PHA-200-01A
200KHz Ultrasonic Transducer for Ultrasonic Level Sensors
Specification:
Items | Technical Parameters | Image | |
Name | 200KHz transducer | | |
Model | PHA-200-01A | ||
Frequency | 200KHz±5% | ||
Detection Distance | 0.10～1.5m | ||
Minimum Parallel lmpedance | 1005Ω±20％ | ||
Capacitance | 730pF±20％ @1KHz | ||
Sensitivity | Driving Voltage：850Vpp，Distance:0.3m， Echo Amplitude：40mV | ||
Operating Voltage | Peak Voltage＜1000VPP | ||
Operating Temperature | -40～+80℃ | ||
Pressure | ≤3Kilos or 0.3MPa | ||
Angle | (Beamwidth) Half-power Beam Width@-3dB:8°±2， Sharp Angle:17°±4 | ||
Housing Material | POM | ||
Usage | Ultrasonic level gauge,Monitoring,Crashproof, Security | ||
Installation Dimension | SIZE：14*20 | ||
Protection Level | IP68 | ||
Weight | 9g±5％（ Length：25cm） | ||
Wiring Instructions | Integrated interface：Red+，White-，Black: shielded wire （ default : without temperature sensor）
| ||
Admittance Curve | Product Structure Diagram | ||
| | ||
Application for Ultrasonic Level Sensors:
Ultrasonic level sensors work by the "time of flight" principle using the speed of sound. The sensor emits a high-frequency pulse, generally in the 20 kHz to 200 kHz range, and then listens for the echo. The pulse is transmitted in a cone, usually about 6° at the apex. The pulse impacts the level surface and is reflected back to the sensor, now acting as a receiver , and then to the transmitter for signal processing.
Level Measurement Image:
200KHz Ultrasonic Transducer for Ultrasonic Level Sensors
Specification:
Items | Technical Parameters | Image | |
Name | 200KHz transducer | | |
Model | PHA-200-01A | ||
Frequency | 200KHz±5% | ||
Detection Distance | 0.10～1.5m | ||
Minimum Parallel lmpedance | 1005Ω±20％ | ||
Capacitance | 730pF±20％ @1KHz | ||
Sensitivity | Driving Voltage：850Vpp，Distance:0.3m， Echo Amplitude：40mV | ||
Operating Voltage | Peak Voltage＜1000VPP | ||
Operating Temperature | -40～+80℃ | ||
Pressure | ≤3Kilos or 0.3MPa | ||
Angle | (Beamwidth) Half-power Beam Width@-3dB:8°±2， Sharp Angle:17°±4 | ||
Housing Material | POM | ||
Usage | Ultrasonic level gauge,Monitoring,Crashproof, Security | ||
Installation Dimension | SIZE：14*20 | ||
Protection Level | IP68 | ||
Weight | 9g±5％（ Length：25cm） | ||
Wiring Instructions | Integrated interface：Red+，White-，Black: shielded wire （ default : without temperature sensor）
| ||
Admittance Curve | Product Structure Diagram | ||
| | ||
Application for Ultrasonic Level Sensors:
Ultrasonic level sensors work by the "time of flight" principle using the speed of sound. The sensor emits a high-frequency pulse, generally in the 20 kHz to 200 kHz range, and then listens for the echo. The pulse is transmitted in a cone, usually about 6° at the apex. The pulse impacts the level surface and is reflected back to the sensor, now acting as a receiver , and then to the transmitter for signal processing.
Level Measurement Image:
![)QXZGA5W]MG{TKZJ8FV2E@E](http://5krorwxhlkpmrik.leadongcdn.com/cloud/iqBqnKjlRilSqijnjkin/QXZGA5W-MG.png)