 |
| Quantity: | |
|---|---|
PHA-40-12PB-FB
Piezohannas
PHA-40-12PB-FB
40KHz Custom PVDF Ultrasonic Range Transducer for Level Measurement
Specification:
Items | Technical Parameters | Image | |
Name | 40KHz anti corrosive explosion-proof transducer |
| |
Model | PHA-40-12PB-FB | ||
Frequency | 40KHz±5% | ||
Detection Distance | 0.5～12m | ||
Minimum Parallel lmpedance | 320Ω±20％ | ||
3400pF±20％ @1KHz | |||
Sensitivity | load driving voltage：700Vpp，Distance:0.6m、Echo Amplitude:530mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
(Beamwidth)Half-power Beam Width@-3dB:10°±10%， Sharp Angle:23°±10% | |||
Housing Material | POM、PVDF physical seal | ||
usage | Ultrasonic level gauge, monitoring, anti - collision, security | ||
Bottom with thread M60×2 or G2A | |||
Protection Level | IP68 | ||
Weight | 490g±5％ | ||
Wiring Instructions | Integrated interface (3PIN,2.54mm terminal) : red positive, white negative, black shield wire; Interface (3PIN,2.0mm terminal) : white and black for temperature sensor wire (MF58); | ||
Admittance Curve | Product Structure Diagram | ||
|
| ||
Ultrasonic Level Measurement Application:
In non-contact ultrasonic level measurement, the sensor emits ultrasonic pulses in the direction of the medium, which then reflects them back.The elapsed time from emission to reception of the signals is proportional to the level in the tank. Ultrasonic sensors are ideal for simple standard applications, both for liquids and for solids.
What Goes into the Making of a Transducer?
The main component of a depth transducer is the piezoceramic element. It is the part that converts electrical pulses into sound waves, and when the echoes return, the piezoceramic element converts the sound waves back into electrical energy. Piezoceramic elements are most often in a disk form,but they may also be in the shape of a bar or a ring. A transducer may contain one element or a series of elements linked together called an array. A transducer is made up of six separate components.
40KHz Custom PVDF Ultrasonic Range Transducer for Level Measurement
Specification:
Items | Technical Parameters | Image | |
Name | 40KHz anti corrosive explosion-proof transducer |
| |
Model | PHA-40-12PB-FB | ||
Frequency | 40KHz±5% | ||
Detection Distance | 0.5～12m | ||
Minimum Parallel lmpedance | 320Ω±20％ | ||
3400pF±20％ @1KHz | |||
Sensitivity | load driving voltage：700Vpp，Distance:0.6m、Echo Amplitude:530mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
(Beamwidth)Half-power Beam Width@-3dB:10°±10%， Sharp Angle:23°±10% | |||
Housing Material | POM、PVDF physical seal | ||
usage | Ultrasonic level gauge, monitoring, anti - collision, security | ||
Bottom with thread M60×2 or G2A | |||
Protection Level | IP68 | ||
Weight | 490g±5％ | ||
Wiring Instructions | Integrated interface (3PIN,2.54mm terminal) : red positive, white negative, black shield wire; Interface (3PIN,2.0mm terminal) : white and black for temperature sensor wire (MF58); | ||
Admittance Curve | Product Structure Diagram | ||
|
| ||
Ultrasonic Level Measurement Application:
In non-contact ultrasonic level measurement, the sensor emits ultrasonic pulses in the direction of the medium, which then reflects them back.The elapsed time from emission to reception of the signals is proportional to the level in the tank. Ultrasonic sensors are ideal for simple standard applications, both for liquids and for solids.
What Goes into the Making of a Transducer?
The main component of a depth transducer is the piezoceramic element. It is the part that converts electrical pulses into sound waves, and when the echoes return, the piezoceramic element converts the sound waves back into electrical energy. Piezoceramic elements are most often in a disk form,but they may also be in the shape of a bar or a ring. A transducer may contain one element or a series of elements linked together called an array. A transducer is made up of six separate components.
