Piezo Hannas (WuHan) Tech Co,.Ltd.-Professional Piezoceramic Elements Supplier
Products
You are here: Home / Products / Medical Transducer / TCD Doppler Sensor / 2MHz TCD Doppler Transcranial Ultrasonic Doppler Transducer
 
High Frequency Wholesale Products For Manufacturers And Factories:

 

Feedback

Related News

content is empty!

Share to:

2MHz TCD Doppler Transcranial Ultrasonic Doppler Transducer

We can offer 2Mhz,4Mhz,8Mhz TCD Doppler Sensor .The shape of shell can be customized based on your requirements.

Application:This probe is used for craniocervical doppler flowmeter,it is good anti-interference ability and high sensitivity,which has been integrated with many TCD equipment manufacturer.

Quantity:
  • PH-2
  • Piezohannas
  • PH-2

    2MHz TCD Doppler Transcranial Ultrasonic Doppler Transducer


Introduction:


The Doppler blood measuring device we developed can equip with 2mhz, 4mhz, 8mhz blood flow sensor to measure the different depth blood flow rate. The output interface is USB port, and input the power is standard PC power. There could offer some sort of raw data or the calculated data as Vp; Vm, Vd, PI, RI, SD, Hr.  Besides, we could offer the output as bitmap spectrum when connect with your laptop or PC directly.


The technical requirements stipulate the main technical requirements of the unit pulse wave type (PW) and the dual-wafer separation continuous wave type (CW) ultrasonic Doppler probes, as the basis for technical inspection and evaluation.


2MHz Craniocervical Doppler probe:


Frequency

 2MHz

Sensitivity

 -7dB

Bandwidth(-6dB):   

35%

Static Capacitance:   

3000 pF

Impedance: 

50Ω

Protection level: 

IPX7 4000Vagainst ground

Length of Cable:   

 2m

Customizable:

Yes


Technology parameters:                                                                      

 

Model

PH-2

PH-4

PH-8

Working frequency

2MHz±10%

4MHz±10%

8MHz±10%

Working method

Pulse wave

Continuous wave

Continuous wave

Static capacitance

2900PF±20%

Send:1500PF±20%

receive:1500PF±20%

send:500PF±20%

receive: 500PF±20%

relative sensitivity

>-9dB

>-20dB

>-15dB

Relative bandwidth

≥30%

≥15%

≥20%

receiving-sending mixed

---

<-50dB

<-50dB

Main use

For brain blood flow analysis

For the carotid artery blood flow analysis

For superficial vascular blood flow analysis


1. Main content and scope of application:

 

 The technical requirements stipulate the main technical requirements of the unit pulse wave type (PW) and the dual-wafer separating continuous wave type (CW) ultrasonic doppler probes, as the basis for technical inspection and evaluation.

 

2. Reference Standard:

 

ZBC41010 unit pulse - general technical requirements and measurement methods for echo ultrasonic transducers.

 

GB6385  safety specific requirements of ultrasonic diagnostic equipment.

 

3. Terms, symbols:

 

3.1 Working frequency fo

The frequency corresponding to the peak value of the doppler transducer and frequency response curve consisting of a unit or a transmit-receive wafer, unit: MHz

 

3.2 Relative bandwidth △f/fo

In the frequency response curve referred to in 3.1, the ratio of the difference between the high and low frequencies fh and fl (Δf ) and fo corresponding to the 6dB drop on the optimum frequency fo

   Δf / fo = (fh―fl) /fo╳100% unit %

3.3 Relative sensitivity

The number of decibels in the ratio of the signal voltage Vt applied to the transmitting wafer to the output voltage Vr on the receiving wafer under the specified reflecting target

   Mtr=20logVr/Vt unit dB

   

(For a unit pulsed transducer, the number of decibels in the ratio of Vt to Vr on the same wafer)

 

3.4 sending-receiving signal mix Mc

 

The number of decibels in the ratio of the signal voltage Vt applied to the emitting wafer to the output voltage Vr on the receiving wafer when the transducer is unloaded.

 

That is: Mc=20logVr/Vt unit dB

 

4. Technical requirements:

 

4.1 PW ultrasonic transducer:

 

4.1.1 Operating frequency (fo): 2MHZ±0.2MHZ

4.1.2 Static capacitance (Co): 2300PF ± 15%

4.1.3 Relative bandwidth (△f/fo): ≥30%

4.1.4 Relative sensitivity (Mtr): better than -8dB

 

4.2 CW ultrasonic transducer (4MHZ):

 

4.2.1 Operating frequency (fo): 4MHZ±0.4MHZ

4.2.2 Static capacitance (Co): 1200 PF ± 15% for each of the transmitting and receiving.

4.2.3 Relative bandwidth (△f/fo): ≥15%

4.2.4 Relative sensitivity (Mtr): better than -20dB

4.2.5 Transmitting and Receiving Signal Mixing (Mc): < -50dB

 

4.3 CW Ultrasound Transducer (8MHZ)

 

4.3.1 Operating frequency (fo): 8MHZ±0.8MHZ

4.3.2 Static capacitance (Co): The transmitting-receiving is 500PF±15% .

4.3.3 Relative bandwidth (△f/fo): ≥20%

4.3.4 Relative sensitivity (Mtr): better than -15dB

4.3.5 Transmitting and Receiving Signal Mixing (Mc): < -50dB


2MHz TCD Doppler Transcranial Ultrasonic Doppler Transducer

2MHz TCD Doppler Transcranial Ultrasonic Doppler Transducer


Hot Products

  • Dimensions:60x5mm Resonant frequency fr: 420 KHz±2%      Electromechanical coupling coefficient K33:≥58% Resonant impedance Zm: ≤45 Ω Static capacitance Cs: 5100pF±14%@1kHz Application: Piezo transducer for milk analysis, Piezo transducer for vibration, transducer for matter dispersion, sonar transducer Ultrasonic sensor, vibration sensor, wall thickness sensor, material stress sensor, pressure sensor, energy electricity harvesting, compression sensor, piezo expansion sensor and others.
  • We can offer 2Mhz,4Mhz,6Mhz TCD Doppler Sensor .The shape of shell can be customized based on your requirements. Application:This probe is used for craniocervical doppler flowmeter,it is good anti-interference ability and high sensitivity,which has been integrated with many TCD equipment manufacturer.
  • We can offer the 5Mhz,8Mhz,10Mhz,13Mhz a-ultrasound sensor Application : The sensor used for measuring thickness of fat of Pet or livestock, and measuring distance or measuring thickness in ophthalmology.
  • Dimension: Outer Dimension: 18mm Inter Dimension:  15mm Height:  15mm Features of piezoelectric crystal: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • Dimension : OD60mm xID30mm x Thi10mm For ultrasonic welding machine,our clients often order 60 x30 x10mm,50 x20 x6.5mm piezo ring ,they are in stock all in our factory. Please contact us as soon if any requirements.
  • Dimension : OD50mm xID20mm x Thi6.5mm For ultrasonic welding machine,our clients often order 60 x30 x10mm,50 x20 x6.5mm piezo ring ,they are in stock all in our factory. Please contact us as soon if any requirements.
  • Hemisphere piezo: Dimension: Diameter : 50mm OD of Hole:8mm Wall thickness : 2mm Features of high temperature piezoceramic: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • Dimension (diameter×thickness):10mmx2mm Features of piezoelectric crystal: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • Dimension (diameter×thickness):16mmx0.4mm Features of piezoelectric crystal: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • Hemisphere piezo: Dimension: Diameter : 15mm OD of Hole:4mm Wall thickness : 1mm Features of high temperature piezoceramic: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • About ultrasonic distance transducer, we can offer transducer that can detect 1M,3M,4M,5M,8M,12M,20M,30M,50M, Also we can accpet customization.
  • About ultrasonic distance transducer, we can offer transducer that can detect 1M,3M,4M,5M,8M,12M,20M,30M,50M, Also we can accpet customization.
  • Size: 54.5x47x40mm Application: Underwater communication device, Hydrophone , Sonar.
Piezo Hannas (WuHan) Tech Co,.Ltd  is a professional piezoelectric ceramics and ultrasonic transducer manufacturer, dedicated to ultrasonic technology and industrial applications.                                    
 

RECOMMEND

CONTACT US

Add: No.456 Wu Luo Road, Wuchang District, Wuhan City, HuBei Province, China.
E-mail: sales@piezohannas.com
Tel: +86 27 84898868
Phone: +86 +18986196674         
QQ: 1553242848 
Skype: live:mary_14398
​        
Copyright 2017  Piezo Hannas (WuHan) Tech Co,.Ltd. All rights reserved. 

Products