 |
| Quantity: | |
|---|---|
PHA-49-08PA
Piezohannas
PHA-49-08PA
50KHz Anti-corrosion Ultrasonic Transducer for Ultrasonic Level Measurement
Technical parameters：
Items | Technical Parameters | Image | |
Name | 49KHz anti-corrosive transducer PA type（integrated type） | | |
Model | PHA-49-08PA | ||
Frequency | 49KHz±5% | ||
Detection Distance | 0.4～8m | ||
Minimum Parallel lmpedance | 300Ω±20％ | ||
2100pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：850Vpp，Distance: 0.6m， Echo Amplitude：450mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:9°±2， Sharp Angle:20°±4 | ||
Housing Material | PVDF | ||
Usage | Ultrasonic level gauge,Monitoring,Crashproof, Security | ||
Bottom with thread ：M48×2 OR G1-1/2 | |||
Protection Level | IP68 | ||
Weight | 340g±5％ | ||
Wiring Instructions | integrated type：connector（3PIN,2.54mm terminal ）：Red+，White-，Black: shielded wire； connector（3PIN,2.0mm terminal ）：white,black:temperature sensor（MF58）； | ||
Admittance Curve | Product Structure Diagram | ||
|
| ||
Test Circuit Schematic of Transducer:
Ultrasonic Level Measurement Application:
Ultrasonic level measurement is a highly cost-effective solution for short- and long-range measurement, even under difficult environmental conditions such as vibrations and dust. Ultrasonic level measurement is a non-contacting technology used in numerous industrial areas to monitor and control the level of liquids, slurries and solids.
ultrasonic level transducer emits acoustic pulses in a narrow beam perpendicular to the transducer face. The level transceiver measures the propagation time between pulse emission and reception of the echo to calculate the distance from the transducer to the material. Variations in sound velocity due to changes in temperature within the permissible range are automatically compensated by the integral temperature sensor.
Application Image:
50KHz Anti-corrosion Ultrasonic Transducer for Ultrasonic Level Measurement
Technical parameters：
Items | Technical Parameters | Image | |
Name | 49KHz anti-corrosive transducer PA type（integrated type） | | |
Model | PHA-49-08PA | ||
Frequency | 49KHz±5% | ||
Detection Distance | 0.4～8m | ||
Minimum Parallel lmpedance | 300Ω±20％ | ||
2100pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：850Vpp，Distance: 0.6m， Echo Amplitude：450mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:9°±2， Sharp Angle:20°±4 | ||
Housing Material | PVDF | ||
Usage | Ultrasonic level gauge,Monitoring,Crashproof, Security | ||
Bottom with thread ：M48×2 OR G1-1/2 | |||
Protection Level | IP68 | ||
Weight | 340g±5％ | ||
Wiring Instructions | integrated type：connector（3PIN,2.54mm terminal ）：Red+，White-，Black: shielded wire； connector（3PIN,2.0mm terminal ）：white,black:temperature sensor（MF58）； | ||
Admittance Curve | Product Structure Diagram | ||
|
| ||
Test Circuit Schematic of Transducer:
Ultrasonic Level Measurement Application:
Ultrasonic level measurement is a highly cost-effective solution for short- and long-range measurement, even under difficult environmental conditions such as vibrations and dust. Ultrasonic level measurement is a non-contacting technology used in numerous industrial areas to monitor and control the level of liquids, slurries and solids.
ultrasonic level transducer emits acoustic pulses in a narrow beam perpendicular to the transducer face. The level transceiver measures the propagation time between pulse emission and reception of the echo to calculate the distance from the transducer to the material. Variations in sound velocity due to changes in temperature within the permissible range are automatically compensated by the integral temperature sensor.
Application Image:
![]]]E)J{Q4K04`@`03J5[MQ](http://5krorwxhlkpmrik.leadongcdn.com/cloud/ilBqnKjlRinSkjljrnin/E-J-Q4K04J.png)
![Q]Q4_V@{WNFAN)1WF_IIJ3](http://5krorwxhlkpmrik.leadongcdn.com/cloud/inBqnKjlRinSkjljinin/Q-Q4_V-WNF.png)