Piezo Hannas (WuHan) Tech Co,.Ltd.-Professional Piezoceramic Elements Supplier
Products
You are here: Home / Products / Ultrasonic Transducers / Transducer for Distance / 200KHz Custom Ultrasonic Transducer for Ultrasonic Anemometer Sensor
 
High Frequency Wholesale Products For Manufacturers And Factories:

 

Feedback
Share to:

200KHz Custom Ultrasonic Transducer for Ultrasonic Anemometer Sensor

200KHz |8° |0.10~1.5| used for Ultrasonic Wind Sensor ,Ultrasonic anemometer,Ultrasonic level gauge,Monitoring,Crashproof,
Security

Quantity:
  • PHA-200-01DA
  • Piezohannas
  • PHA-200-01DA

    200KHz Ultrasonic Transducer for Ultrasonic Anemometer Sensor



Technical parameters:


Items

Technical Parameters

Image

Name

200KHz ultrasonic transducer

8O[JNP)(EZ)AHX74P3@YE6 

    LII12U_]UGN71`3P11KE_0

Model

PHA-200-01DA   

Frequency

200KHz±5%

Detection Distance

0.101.5m

Minimum

Parallel lmpedance

1000Ω±20

Capacitance

1980pF±20@1KHz

 

Sensitivity

Driving Voltage800VppDistance:0.3m

Echo Amplitude26mV

Operating

Voltage

Peak Voltage1000 VPP

Operating

Temperature

-40+80℃

Pressure

≤3Kilos or 0.3MPa

 

Angle

(Beamwidth) Half-power Beam Width@-3dB:10°±2,

Sharp Angle:23°±4

Housing Material

POM

 

Usage

ultrasonic anemometer,Ultrasonic level gauge,Monitoring,Crashproof,


Installation

Dimension

dimension:12*17

Protection Level

IP68

Weight

5g±5%(Length10cm

Wiring Instructions

integrated type:connectorRed+,White-,Black: shielded wire;

 

Admittance Curve

Product Structure Diagram

H@B7}U]I59Q)UY]$D4FRU1 

UM`8G`U363XAQ8]H0}C8WK



 Test Circuit Schematic of Transducer:


 Test Circuit Schematic of Transducer:

 


Schematic Diagram of Temperature Sensor:


Schematic Diagram of Temperature Sensor:


Integrated type Cable instruction:    

1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)

Red: transducer +      

White: transducer -         

Black: shielding

01

 

2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)

 

02

 

Red and black are temperature sensor wiring

 

Application of Ultrasonic Wind Sensor:


Ultrasonic anemometer has all digital signal detection, high accuracy, automatically heating ability to remove snow and ice .It is the anemometer with real-time measurement of wind speed, wind direction and acoustic temperature.Ultrasonic anemometer takes four ultrasonic sensors in the two-dimensional plane to send and receive ultrasonic signals; it is an instrument using the difference of the ultrasonic spread time in the air to measure wind speed and wind direction.Ultrasonic anemometer calculates the wind speed according to the difference of the sound spread time in the air; then calculates the temperature according to the physical relationship between temperature and sound speed.



Application Image of Ultrasonic Anemometer:


Application Imgae of Ultrasonic Wind Sensor:



Hot Products

  • Dimensions:60x5mm Resonant frequency fr: 420 KHz±2%      Electromechanical coupling coefficient K33:≥58% Resonant impedance Zm: ≤45 Ω Static capacitance Cs: 5100pF±14%@1kHz Application: Piezo transducer for milk analysis, Piezo transducer for vibration, transducer for matter dispersion, sonar transducer Ultrasonic sensor, vibration sensor, wall thickness sensor, material stress sensor, pressure sensor, energy electricity harvesting, compression sensor, piezo expansion sensor and others.
  • We can offer 2Mhz,4Mhz,6Mhz TCD Doppler Sensor .The shape of shell can be customized based on your requirements. Application:This probe is used for craniocervical doppler flowmeter,it is good anti-interference ability and high sensitivity,which has been integrated with many TCD equipment manufacturer.
  • We can offer the 5Mhz,8Mhz,10Mhz,13Mhz a-ultrasound sensor Application : The sensor used for measuring thickness of fat of Pet or livestock, and measuring distance or measuring thickness in ophthalmology.
  • Dimension: Outer Dimension: 18mm Inter Dimension:  15mm Height:  15mm Features of piezoelectric crystal: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • Dimension : OD60mm xID30mm x Thi10mm For ultrasonic welding machine,our clients often order 60 x30 x10mm,50 x20 x6.5mm piezo ring ,they are in stock all in our factory. Please contact us as soon if any requirements.
  • Dimension : OD50mm xID20mm x Thi6.5mm For ultrasonic welding machine,our clients often order 60 x30 x10mm,50 x20 x6.5mm piezo ring ,they are in stock all in our factory. Please contact us as soon if any requirements.
  • Hemisphere piezo: Dimension: Diameter : 50mm OD of Hole:8mm Wall thickness : 2mm Features of high temperature piezoceramic: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • Dimension (diameter×thickness):10mmx2mm Features of piezoelectric crystal: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • Dimension (diameter×thickness):16mmx0.4mm Features of piezoelectric crystal: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • Hemisphere piezo: Dimension: Diameter : 15mm OD of Hole:4mm Wall thickness : 1mm Features of high temperature piezoceramic: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • About ultrasonic distance transducer, we can offer transducer that can detect 1M,3M,4M,5M,8M,12M,20M,30M,50M, Also we can accpet customization.
  • About ultrasonic distance transducer, we can offer transducer that can detect 1M,3M,4M,5M,8M,12M,20M,30M,50M, Also we can accpet customization.
  • Size: 54.5x47x40mm Application: Underwater communication device, Hydrophone , Sonar.
Piezo Hannas (WuHan) Tech Co,.Ltd  is a professional piezoelectric ceramics and ultrasonic transducer manufacturer, dedicated to ultrasonic technology and industrial applications.                                    
 

RECOMMEND

CONTACT US

Add: No.456 Wu Luo Road, Wuchang District, Wuhan City, HuBei Province, China.
E-mail: sales@piezohannas.com
Tel: +86 27 84898868
Phone: +86 +18986196674         
QQ: 1553242848 
Skype: live:mary_14398
​        
Copyright 2017  Piezo Hannas (WuHan) Tech Co,.Ltd. All rights reserved. 

Products