| Availability: | |
|---|---|
| Quantity: | |
PL-1M-01J
Piezohannas
PL-1M-01J
1MHz Brass Heat Meter Transducer for Ultrasonic Flowmeter
| Items | Technical Parameters | Image | |
| Name | Ultrasonic transducer for heat flowmeter ( brass case) | 
 
 
 
 | |
| Model | PL-1M-01J | ||
| Frequency | 1MHz±30KHz | ||
| Detection Distance | 0.05 ~ 3m | ||
| Minimum Parallel lmpedance | 50Ω±20% | ||
| 1200pF±20% @1KHz | |||
| Sensitivity | Driving Voltage:24Vpp、Distance:0.3m、 Echo Amplitude: 320mV | ||
| -40~+80℃ | |||
| ≤3Kilos or 0.3MPa | |||
| (Beamwidth)Half-power Beam Width@-3dB:5°±1, Sharp Angle:12°±2 | |||
| Housing Material | brass | ||
| Usage | Ultrasonic flowmeter,submarine range finder | ||
| Checking product structure diagram below | |||
| Protection Level | IP68 | ||
| Weight | 17g±5%(Length:25cm) | ||
| Wiring Instructions | Red:transducer+,White:transducer-,Black: shielded wire (temperature sensor wire is optional) 
 | ||
| Admittance Curve | Product Structure Diagram | ||
| 
   | |||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor:
 
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
1MHz Brass Heat Meter Transducer for Ultrasonic Flowmeter
| Items | Technical Parameters | Image | |
| Name | Ultrasonic transducer for heat flowmeter ( brass case) | 
 
 
 
 | |
| Model | PL-1M-01J | ||
| Frequency | 1MHz±30KHz | ||
| Detection Distance | 0.05 ~ 3m | ||
| Minimum Parallel lmpedance | 50Ω±20% | ||
| 1200pF±20% @1KHz | |||
| Sensitivity | Driving Voltage:24Vpp、Distance:0.3m、 Echo Amplitude: 320mV | ||
| -40~+80℃ | |||
| ≤3Kilos or 0.3MPa | |||
| (Beamwidth)Half-power Beam Width@-3dB:5°±1, Sharp Angle:12°±2 | |||
| Housing Material | brass | ||
| Usage | Ultrasonic flowmeter,submarine range finder | ||
| Checking product structure diagram below | |||
| Protection Level | IP68 | ||
| Weight | 17g±5%(Length:25cm) | ||
| Wiring Instructions | Red:transducer+,White:transducer-,Black: shielded wire (temperature sensor wire is optional) 
 | ||
| Admittance Curve | Product Structure Diagram | ||
| 
   | |||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor:
 
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
Products | About Us | News | Markets and Applications | FAQ | Contact Us