The ultrasonic receiver is composed of an ultrasonic transducer and a receiving circuit. In order to achieve a wide range of ultrasonic ranging, it is required not only that the ultrasonic receiving circuit can amplify the weak signal reflected from the distant target, but also that the strong signa

With regard to ultrasonic transducers, ultrasonic transmitting and receiving circuits are devices for converting electrical energy and acoustic energy. Generally, the ultrasonic transducer has low electromechanical energy efficiency, which seriously affects the working distance of the ultrasonic tra

Mainly introducing the connection mode of the ultrasonic transducer array (auxiliary receiver) output port. The next chapter studies the design problem of the receiving and transmitting circuit of the disc-type piezoelectric transducer (main transducer), The circuit-assisted receiver array consists

The resonant frequency and bandwidth of ultrasonic transducers are selected from the PZT-5A piezoelectric ceramic disc polarized in the thickness direction as the transducer, and the radius R of the piezoelectric ceramic disc is 6mm and has a thickness h. The height of the outer surface of the inner

When the axial and radial electromechanical factors of the disc-type piezoelectric vibrator are relatively strong, the one-dimensional theory established by the pure radial model or the pure thickness model is not accurate enough. Between the theoretical calculated value and the experimental value.

A physical picture of a piezoelectric disc-type transducer designed and fabricated. In order to reduce the influence of multipath noise, using the aforementioned sound field Fresnel zone, the ultrasonic transducer is slightly higher than the radiating surface (or acoustic window) of the piezoelectri

Piezoelectric disc type of transducers discuss the advantages and disadvantages of various forms of ultrasonic transducer. Considering the performance, mounting dimensions and field testing of ultrasonic ranging sensors, piezoelectric ceramic discs are selected radial/ thickness of the vibration mod

Ray characteristics of ultrasonic waves are formed in a straight line when they encounter two substances with different acoustic impedance ratios.At the interface, reflection and refraction transmission occurs. The reflection and refraction of ultrasonic waves follow the laws of geometric optics. Th

Modeling and experiment of ultrasonic transducer in the air medium, the frequency band of the ultrasonic sensor is generally narrow, which directly affects its detection performance for high-speed moving targets. In order to solve the narrow band of the ultrasonic sensor, a micro-miniature transduce

A multi-probe ultrasonic range finder for detecting traffic flow conditions, which not only provides information for traffic flow survey statistics and intersection traffic signal automatic control systems, but also applies to various automatic monitoring related to motor vehicle passing and arrival

The phase estimation method of time delay estimation is a practical method to improve the accuracy of ultrasonic delay estimation. Based on the fact that for a simple harmonic, the fourier transform (DFT) can be used to calculate its fourier coefficient corresponding to the resonant frequency, and t

In the industry, the typical application of ultrasonic distance transducers are non-destructive testing of metals and ultrasonic thickness measurement. In the past, many technologies were hindered by inability detecting the inside of objects, and the emergence of ultrasonic sensing technology change

Work programIf a piezoelectric ceramic piece with a resonant frequency of 40 kHz in the transmitting sensor is applied (a 40 KHz high-frequency voltage is applied to the double crystal oscillator, the piezoelectric ceramic piece is elongated and shortened according to the polarity of the applied hig

Output function All series of ultrasonic sensors have a switch output type. Some products also have 2 switching outputs (such as minimum and maximum level control). Most products offer either analog currents or analog voltage output. Noise suppression, metal knocking, roaring and other noises do not