 |
PH-29H
Piezohannas
PH-29H
Non Destructive Concrete Coating Thickness Measurement Instruments
Specification:
Items | Technical Parameters |
Mode | PH-29H |
Operating Principle | F Magnetic Induction |
Measuring Range | 0~15 mm
|
Resolution | 0.01 mm / 0.1 mm |
Min. Radius Workpiece |
F Type: convex 20 mm / concave 50 mm
|
Min. Measuring Area | 16 mm |
Min. Sample Thickness | 0.3 mm
|
Accuracy | ± 1~3%n or ± 0.2 mm |
Auto Power Off | |
Metric / Imperial | Convertible
|
Battery Indicator | Low Battery Indicator
|
Operating Conditions | Temp. 0~40 °C, Humidity: 10~90 %RH
|
Power Supply | 4 x 1.5 V AAA (UM-4) Battery |
Dimensions | 126 x 65 x 27 mm |
Weight | 210 g (Not Including Batteries) |
Applications：
The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on materials of iron . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc.
Features Details:
* The F probes measure the thickness of non-magnetic materials on magnetic materials.
* Two measurement mode: Single and Continuous（Notice：Continuous mode is convenient to measure the
coating thickness of curved objects and tiny objects.）
* Metric/imperial system selectable.
* Manual or automatic shut down.
* Automatic memory of calibration value,and automatic recognize the substrate.
* Operation process have buzzing reminder,while no buzzing in continuous mode.
* Use “USB data output” and “RS-232 data output” to connect with PC.
* Provide “Bluetooth ™ data output” choice.
Standard Accessories:
1. Main Unit
2. Probe (F Type)
3. Calibration Base Set (F Type) CTG-BS
4. Calibration Foils CTG-CF (1 set, 4 pieces)
5. Carrying Case
6. Operation Manual
Optional Accessories:
1. USB, RS-232C data cable with software
2. Bluetooth data out put with software
Non Destructive Concrete Coating Thickness Measurement Instruments
Specification:
Items | Technical Parameters |
Mode | PH-29H |
Operating Principle | F Magnetic Induction |
Measuring Range | 0~15 mm
|
Resolution | 0.01 mm / 0.1 mm |
Min. Radius Workpiece |
F Type: convex 20 mm / concave 50 mm
|
Min. Measuring Area | 16 mm |
Min. Sample Thickness | 0.3 mm
|
Accuracy | ± 1~3%n or ± 0.2 mm |
Auto Power Off | |
Metric / Imperial | Convertible
|
Battery Indicator | Low Battery Indicator
|
Operating Conditions | Temp. 0~40 °C, Humidity: 10~90 %RH
|
Power Supply | 4 x 1.5 V AAA (UM-4) Battery |
Dimensions | 126 x 65 x 27 mm |
Weight | 210 g (Not Including Batteries) |
Applications：
The F probes measure the thickness of non-magnetic materials (e.g. paint, plastic, porcelain enamel, copper, zinc, aluminium, chrome etc.) on materials of iron . often used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide layer, copper tile, aluminium tile, some alloy tile, paper etc.
Features Details:
* The F probes measure the thickness of non-magnetic materials on magnetic materials.
* Two measurement mode: Single and Continuous（Notice：Continuous mode is convenient to measure the
coating thickness of curved objects and tiny objects.）
* Metric/imperial system selectable.
* Manual or automatic shut down.
* Automatic memory of calibration value,and automatic recognize the substrate.
* Operation process have buzzing reminder,while no buzzing in continuous mode.
* Use “USB data output” and “RS-232 data output” to connect with PC.
* Provide “Bluetooth ™ data output” choice.
Standard Accessories:
1. Main Unit
2. Probe (F Type)
3. Calibration Base Set (F Type) CTG-BS
4. Calibration Foils CTG-CF (1 set, 4 pieces)
5. Carrying Case
6. Operation Manual
Optional Accessories:
1. USB, RS-232C data cable with software
2. Bluetooth data out put with software
