Piezo Hannas (WuHan) Tech Co,.Ltd.-Professional Piezoceramic Elements Supplier
Products
You are here: Home / Products / Ultrasonic Transducers / Transducer for Depth / Insertion Type 1MHz Ultrasonic Flowmeter Transducer for Ultrasonic Flowmeter
 
High Frequency Wholesale Products For Manufacturers And Factories:

 

Feedback
Share to:

Insertion Type 1MHz Ultrasonic Flowmeter Transducer for Ultrasonic Flowmeter

Application :ultrasonic flowmeter

Quantity:
  • PHW-1M-01E
  • Piezohannas
  • PHW-1M-01E

Insertion Type 1MHz Ultrasonic Flowmeter Transducer for Ultrasonic Flowmeter


 Technical parameters:

 

Items

Technical Parameters

Image

Name

1MHz plug-in underwater ultrasonic transducer

 

 

$P105$GEKMEFFP]@GL(QJ 

 

Model

PHW-1M-01E

Frequency

1MHz±5%

Detection Distance

0.05 ~ 3m

Minimum

Parallel lmpedance

25Ω±20%

Capacitance

2800pF±20% @1KHz

 

Sensitivity

Driving Voltage24Vpp、Distance:0.3m、

Echo Amplitude:1.6 V

Operating

Voltage

Peak Voltage<300VPP

Operating

Temperature

-40~+80℃

Pressure

3Kilos or 0.3MPa

 

Angle

(Beamwidth) Half-power Beam Width@-3dB:3.2°±1,

Sharp Angle:7.5°±2

Housing Material

POM

 

Usage

ultrasonic flowmetersubmarine range finder

Installation

Dimension

See the product structure drawing

Protection Level

IP68

Weight

50g±5%(Length:2m)

Wiring Instructions

  Red+,White-,Black: shielded wire(temperature sensor is optional)

Admittance Curve

Product Structure Diagram

%Q(N58E`@GMWYIFJW`7I[H7 

7BMTVBS8HP9AB`3O3[@V15


Block diagram of ultrasonic transducer :


0RYJG8D(6_Q9XM%86PDG


Schematic Diagram of Temperature Sensor:



O3`1PA5YR5%Z5`DQ1R




Split type Cable instruction:           

Standard wire is 10M, signal will attenuate 6dB for each 50M increasing of wire.

 

1. Three core wiring instructions:

 

 Red: transducer +         

Blue: temperature sensor +       

Black: public -


ACL0C4P5NWR07ZUFQ(I7MF


Application of Insertion Type Ultrasonic Flowmeter


The Insertion Ultrasonic Flowmeter provides an accurate reading of liquid flow rate and accumulated flow. Designed to support commercial irrigation applications, the QS200 is available in five pipe sizes, ranging from 1 to 4 inches.The ultrasonic insert is available with a PVC tee or as an “insert retrofit” for replacement of existing paddlewheel flow sensors. Designed for above and below grade applications, such as irrigation, municipal and underground monitoring where the flow rates are between 0.1 to 15 fps (0.03 to 4.57 m/s) and temperatures are below 140° F (60° C).



Application Image


Insertion Type 1MHz Ultrasonic Flowmeter Transducer for Ultrasonic Flowmeter


Hot Products

  • Dimensions:60x5mm Resonant frequency fr: 420 KHz±2%      Electromechanical coupling coefficient K33:≥58% Resonant impedance Zm: ≤45 Ω Static capacitance Cs: 5100pF±14%@1kHz Application: Piezo transducer for milk analysis, Piezo transducer for vibration, transducer for matter dispersion, sonar transducer Ultrasonic sensor, vibration sensor, wall thickness sensor, material stress sensor, pressure sensor, energy electricity harvesting, compression sensor, piezo expansion sensor and others.
  • We can offer 2Mhz,4Mhz,6Mhz TCD Doppler Sensor .The shape of shell can be customized based on your requirements. Application:This probe is used for craniocervical doppler flowmeter,it is good anti-interference ability and high sensitivity,which has been integrated with many TCD equipment manufacturer.
  • We can offer the 5Mhz,8Mhz,10Mhz,13Mhz a-ultrasound sensor Application : The sensor used for measuring thickness of fat of Pet or livestock, and measuring distance or measuring thickness in ophthalmology.
  • Dimension: Outer Dimension: 18mm Inter Dimension:  15mm Height:  15mm Features of piezoelectric crystal: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • Dimension : OD60mm xID30mm x Thi10mm For ultrasonic welding machine,our clients often order 60 x30 x10mm,50 x20 x6.5mm piezo ring ,they are in stock all in our factory. Please contact us as soon if any requirements.
  • Dimension : OD50mm xID20mm x Thi6.5mm For ultrasonic welding machine,our clients often order 60 x30 x10mm,50 x20 x6.5mm piezo ring ,they are in stock all in our factory. Please contact us as soon if any requirements.
  • Hemisphere piezo: Dimension: Diameter : 50mm OD of Hole:8mm Wall thickness : 2mm Features of high temperature piezoceramic: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • Dimension (diameter×thickness):10mmx2mm Features of piezoelectric crystal: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • Dimension (diameter×thickness):16mmx0.4mm Features of piezoelectric crystal: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • Hemisphere piezo: Dimension: Diameter : 15mm OD of Hole:4mm Wall thickness : 1mm Features of high temperature piezoceramic: 1. Low impedance 2. The waveform is stable 3. High electromechanical conversion efficiency 4. Low dielectric loss 5. Heat a small 6. Big spray volume 7. The life of more than 5000 hours 8. Acid corrosion
  • About ultrasonic distance transducer, we can offer transducer that can detect 1M,3M,4M,5M,8M,12M,20M,30M,50M, Also we can accpet customization.
  • About ultrasonic distance transducer, we can offer transducer that can detect 1M,3M,4M,5M,8M,12M,20M,30M,50M, Also we can accpet customization.
  • Size: 54.5x47x40mm Application: Underwater communication device, Hydrophone , Sonar.
Piezo Hannas (WuHan) Tech Co,.Ltd  is a professional piezoelectric ceramics and ultrasonic transducer manufacturer, dedicated to ultrasonic technology and industrial applications.                                    
 

RECOMMEND

CONTACT US

Add: No.456 Wu Luo Road, Wuchang District, Wuhan City, HuBei Province, China.
E-mail: sales@piezohannas.com
Tel: +86 27 84898868
Phone: +86 +18986196674         
QQ: 1553242848 
Skype: live:mary_14398
​        
Copyright 2017  Piezo Hannas (WuHan) Tech Co,.Ltd. All rights reserved. 

Products