 |
| Quantity: | |
|---|---|
PHYA-200-01J
Piezohannas
PHYA-200-01J
200KHz Ultrasonic Transducer with Heater for Wind Speed Sensor
Technical parameters：
Items | Technical Parameters | Image | |
Name | 200KHz ultrasonic transducer with a heater（heating type） |
| |
Model | PHYA-200-01J | ||
Frequency | 200KHz±5% | ||
Detection distance | 0.05～1.5m | ||
Minimum Parallel lmpedance | 900Ω±20％ | ||
600pF±20％ @1KHz | |||
Sensitivity | no load driving voltage：200Vpp，distance0.3m， Echo Amplitude：15mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| half -power angle@-3dB：9.2°±10%； Sharp Angle:21.7°±10%； | ||
Housing Material | rubber | ||
Usage | Ultrasonic range finder | ||
See the product structure diagram for details | |||
Protection Level | IP68 | ||
Weight | 15g±5％（Length：7cm） | ||
Wiring Instructions | 3Pin2.54 interface: red: transducer +, white: MF52E-103H3950FA, black: public end, Red, white: heating film 12V, 5W; | ||
Admittance Curve | Product Structure Diagram | ||
|
| ||
200KHz Ultrasonic Transducer with Heater for Wind Speed Sensor
Technical parameters：
Items | Technical Parameters | Image | |
Name | 200KHz ultrasonic transducer with a heater（heating type） |
| |
Model | PHYA-200-01J | ||
Frequency | 200KHz±5% | ||
Detection distance | 0.05～1.5m | ||
Minimum Parallel lmpedance | 900Ω±20％ | ||
600pF±20％ @1KHz | |||
Sensitivity | no load driving voltage：200Vpp，distance0.3m， Echo Amplitude：15mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| half -power angle@-3dB：9.2°±10%； Sharp Angle:21.7°±10%； | ||
Housing Material | rubber | ||
Usage | Ultrasonic range finder | ||
See the product structure diagram for details | |||
Protection Level | IP68 | ||
Weight | 15g±5％（Length：7cm） | ||
Wiring Instructions | 3Pin2.54 interface: red: transducer +, white: MF52E-103H3950FA, black: public end, Red, white: heating film 12V, 5W; | ||
Admittance Curve | Product Structure Diagram | ||
|
| ||
