 |
| Quantity: | |
|---|---|
PHA-200-01KC
Piezohannas
PHA-200-01KC
200KHz Ultrasonic Transducer for Ultrasonic Wind Sensor
Items | Technical Parameters | Image | |
Name | 200KHz ultrasonic transducer |
| |
Model | PHA-200-01KC | ||
Frequency | 200KHz±5% | ||
Detection Distance | 0.10～1.5m | ||
Minimum Parallel lmpedance | 2300Ω±20％ | ||
370pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：800Vpp，Distance:0.3m， Echo Amplitude：40mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:10°±2， Sharp Angle:23°±4 | ||
Housing Material | POM | ||
Usage | anemorumbometer, gas flowmeter | ||
thread:M12*1.5 | |||
Protection Level | IP68 | ||
Weight | 8.7g±5％（ Length：10cm） | ||
Wiring Instructions | integrated type：connector：Red+，White-，Black: shielded wire； temp sensor is optional | ||
Admittance Curve | Product Structure Diagram | ||
| | ||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor:
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Application Image:
200KHz Ultrasonic Transducer for Ultrasonic Wind Sensor
Items | Technical Parameters | Image | |
Name | 200KHz ultrasonic transducer |
| |
Model | PHA-200-01KC | ||
Frequency | 200KHz±5% | ||
Detection Distance | 0.10～1.5m | ||
Minimum Parallel lmpedance | 2300Ω±20％ | ||
370pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：800Vpp，Distance:0.3m， Echo Amplitude：40mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:10°±2， Sharp Angle:23°±4 | ||
Housing Material | POM | ||
Usage | anemorumbometer, gas flowmeter | ||
thread:M12*1.5 | |||
Protection Level | IP68 | ||
Weight | 8.7g±5％（ Length：10cm） | ||
Wiring Instructions | integrated type：connector：Red+，White-，Black: shielded wire； temp sensor is optional | ||
Admittance Curve | Product Structure Diagram | ||
| | ||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor:
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Application Image:
