 |
| Quantity: | |
|---|---|
PHA-200-01G
Piezohannas
PHA-200-01G
200KHz Low Cost Ultrasonic Transducer for Ultrasonic Gas Flow Meter
Items | Technical Parameters | Image | |
Name | 200KHz ultrasonic transducer |
| |
Model | PHA-200-01G | ||
Frequency | 200KHz±5% | ||
Detection Distance | 0.10～1.5m | ||
Minimum Parallel lmpedance | 900Ω±20％ | ||
600pF±20％ @1KHz | |||
Sensitivity | |||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:6°±2， Sharp Angle:16°±4 | ||
Housing Material | stainless steel | ||
Usage | Ultrasonic Gas Flow Meter | ||
thread：M18*1.5 | |||
Protection Level | IP68 | ||
Weight | |||
Wiring Instructions | integrated type：connector：Red+，White-，Black: shielded wire；
| ||
Admittance Curve | Product Structure Diagram | ||
| | ||
Gas Flow Measurement Application:
When we took the decision to begin the development process of a new gas clamp-on ultrasonic flowmeter we had two clear goals in mind: To be able to provide accurate and reliable flow measurements, and to do so on applications where other existing instruments would not. From that point forward the focus has been on not just developing a technology as good as what was available on the market, but something that took the industry to a new level.
The gas flowmeter retains many of the popular features of the range such as the robust design, ease of use and high quality sensors but marries this with entirely new ultrasonic hardware. This new generation of instrument was required in order to meet the exacting targets set by the company when measuring a more demanding medium varying conditions.ultrasonic gas flowmeters can measure a wide variety of different gases in pipes of up to 1500 mm in diameter. The key feature of our gas technology is that it can take these measurements, in steel pipes, down to atmospheric pressure. The instruments have a measurement range of 0.1 ... 75 m/s of gas with up to 5 % moisture content.
200KHz Low Cost Ultrasonic Transducer for Ultrasonic Gas Flow Meter
Items | Technical Parameters | Image | |
Name | 200KHz ultrasonic transducer |
| |
Model | PHA-200-01G | ||
Frequency | 200KHz±5% | ||
Detection Distance | 0.10～1.5m | ||
Minimum Parallel lmpedance | 900Ω±20％ | ||
600pF±20％ @1KHz | |||
Sensitivity | |||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:6°±2， Sharp Angle:16°±4 | ||
Housing Material | stainless steel | ||
Usage | Ultrasonic Gas Flow Meter | ||
thread：M18*1.5 | |||
Protection Level | IP68 | ||
Weight | |||
Wiring Instructions | integrated type：connector：Red+，White-，Black: shielded wire；
| ||
Admittance Curve | Product Structure Diagram | ||
| | ||
Gas Flow Measurement Application:
When we took the decision to begin the development process of a new gas clamp-on ultrasonic flowmeter we had two clear goals in mind: To be able to provide accurate and reliable flow measurements, and to do so on applications where other existing instruments would not. From that point forward the focus has been on not just developing a technology as good as what was available on the market, but something that took the industry to a new level.
The gas flowmeter retains many of the popular features of the range such as the robust design, ease of use and high quality sensors but marries this with entirely new ultrasonic hardware. This new generation of instrument was required in order to meet the exacting targets set by the company when measuring a more demanding medium varying conditions.ultrasonic gas flowmeters can measure a wide variety of different gases in pipes of up to 1500 mm in diameter. The key feature of our gas technology is that it can take these measurements, in steel pipes, down to atmospheric pressure. The instruments have a measurement range of 0.1 ... 75 m/s of gas with up to 5 % moisture content.
![9WFX(DOWBS3SSHZ_1W]]1FC](http://5krorwxhlkpmrik.leadongcdn.com/cloud/ipBqnKjlRinSojjpkmio/9WFX-DOWBS.png)
