 |
| Quantity: | |
|---|---|
PHA-105-03C
Piezohannas
PHA-105-03C
Low Cost 105KHz Ultrasonic Transducer for Anemorumbometer
Technical parameters：
Items | Technical Parameters | Image | |
Name | 105KHz ultrasonic transducer C type |
| |
Model | PHA-105-03C | ||
Frequency | 105KHz±5% | ||
Detection Distance | 0.15～3m | ||
Minimum Parallel lmpedance | 540Ω±20％ | ||
1200pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：750Vpp，Distance:0.3m， Echo Amplitude：150mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:9.1°±2， Sharp Angle:21.7°±4 | ||
Housing Material | LY12 | ||
Usage | Ultrasonic level gauge，ultrasonic transducer，anemorumbometer ，ultrasonic gas flow meter | ||
Check the structure diagram below | |||
Protection Level | IP68 | ||
Weight | 50g±5％（Length：2m） | ||
Wiring Instructions | integrated type：connector：Red+，White-，Black: shielded wire； ( temp sensor is optional) | ||
Admittance Curve | Product Structure Diagram | ||
| | ||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor:
Integrated type Cable instruction: :
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Application of Ultrasonic level measurement:
Continuous level measurement in liquids and solids with ultrasonic level sensors
Ultrasonic level measurement with Prosonic sensors provides continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of the sensors. Check out the broad range of Prosonic devices for ultrasonic level measurement and click on the button below.
Low Cost 105KHz Ultrasonic Transducer for Anemorumbometer
Technical parameters：
Items | Technical Parameters | Image | |
Name | 105KHz ultrasonic transducer C type |
| |
Model | PHA-105-03C | ||
Frequency | 105KHz±5% | ||
Detection Distance | 0.15～3m | ||
Minimum Parallel lmpedance | 540Ω±20％ | ||
1200pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：750Vpp，Distance:0.3m， Echo Amplitude：150mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:9.1°±2， Sharp Angle:21.7°±4 | ||
Housing Material | LY12 | ||
Usage | Ultrasonic level gauge，ultrasonic transducer，anemorumbometer ，ultrasonic gas flow meter | ||
Check the structure diagram below | |||
Protection Level | IP68 | ||
Weight | 50g±5％（Length：2m） | ||
Wiring Instructions | integrated type：connector：Red+，White-，Black: shielded wire； ( temp sensor is optional) | ||
Admittance Curve | Product Structure Diagram | ||
| | ||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor:
Integrated type Cable instruction: :
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Application of Ultrasonic level measurement:
Continuous level measurement in liquids and solids with ultrasonic level sensors
Ultrasonic level measurement with Prosonic sensors provides continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of the sensors. Check out the broad range of Prosonic devices for ultrasonic level measurement and click on the button below.
![EK]EIC%B4KCK6{H31CLF]NT](http://5krorwxhlkpmrik.leadongcdn.com/cloud/ijBqnKjlRinSljmpqliq/EK-EIC-B4K.png)
![EZBPE]6MXOW(B60QKW(8@WY](http://5krorwxhlkpmrik.leadongcdn.com/cloud/ijBqnKjlRinSljmpkpiq/EZBPEMXOW-.png)
