content is empty!
Availability: | |
---|---|
CA-YD-186G
CA-YD-186G
Low Impedance Industrial IEPE Isolated Accelerometers Transducer
Feature:
Built-in IEPE isolated two cores low impedance voltage output
can be connected with two-core cable
floating industrial inspection
Specifications:
Axial Sensitivity | ~100mV/ g |
Measurement Range(peak) | 50 g |
Transverse Sensitivity | ≤5 % |
Frequency Response(0.5dB) | 1~ 4,000 Hz |
Mounting Resonance Frequency | 20,000 Hz |
Temperature Response | Refer to the temp. curve |
Polarity | Positive |
Operating Temp. Range | -40~+120 ℃ |
Shock Limit | 3,000g |
Operating Voltage (constant-current source) | +12~+28 V(DC) |
Operating Current | +2~+10 mA |
Output Signal (peak) | ≤6V |
Noise | <4 mg |
Output Impedance | <100 Ω |
DC Offset Voltage | 7±1 V |
Resistance of signal, ground and shell | ≥108Ω |
Thermal Transient Sensitivity | 8mg/℃(0.3Hz) |
Magnetic Sensitivity | 1g/T |
Base Strain Sensitivity | 0.2mg/με |
Weight | 65g |
Case Material | Stainless steel |
Mounting Method | M6 Screw |
Sensing Element | PZT-5 |
Structural Design | Shear |
Output | Top M12 × 1 two-pin socket |
Accessories: | |
Sensor Certificate | Calibration parameter, frequency response curve |
M6 bolt, Protection cap | one |
Cable with two core plugs(3m) | one |
Image:
Typical Temperature Response
Frequency Response
Low Impedance Industrial IEPE Isolated Accelerometers Transducer
Feature:
Built-in IEPE isolated two cores low impedance voltage output
can be connected with two-core cable
floating industrial inspection
Specifications:
Axial Sensitivity | ~100mV/ g |
Measurement Range(peak) | 50 g |
Transverse Sensitivity | ≤5 % |
Frequency Response(0.5dB) | 1~ 4,000 Hz |
Mounting Resonance Frequency | 20,000 Hz |
Temperature Response | Refer to the temp. curve |
Polarity | Positive |
Operating Temp. Range | -40~+120 ℃ |
Shock Limit | 3,000g |
Operating Voltage (constant-current source) | +12~+28 V(DC) |
Operating Current | +2~+10 mA |
Output Signal (peak) | ≤6V |
Noise | <4 mg |
Output Impedance | <100 Ω |
DC Offset Voltage | 7±1 V |
Resistance of signal, ground and shell | ≥108Ω |
Thermal Transient Sensitivity | 8mg/℃(0.3Hz) |
Magnetic Sensitivity | 1g/T |
Base Strain Sensitivity | 0.2mg/με |
Weight | 65g |
Case Material | Stainless steel |
Mounting Method | M6 Screw |
Sensing Element | PZT-5 |
Structural Design | Shear |
Output | Top M12 × 1 two-pin socket |
Accessories: | |
Sensor Certificate | Calibration parameter, frequency response curve |
M6 bolt, Protection cap | one |
Cable with two core plugs(3m) | one |
Image:
Typical Temperature Response
Frequency Response
Products | About Us | News | Markets and Applications | FAQ | Contact Us