Hubei Hannas Tech Co.,Ltd-Professional Piezoceramic Elements Supplier
News
You are here: Home / News / Ultrasonic Transducer information / Installation Method of Ultrasonic Cleaning Transducer

Installation Method of Ultrasonic Cleaning Transducer

Views: 26     Author: Site Editor     Publish Time: 2019-04-19      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button


Preparation tools of of ultrasonic cleaning transducer:


Argon arc welding, hex wrench No. 10, ferrochrome wire, 2.5 square high temperature wire, 2*2.5 cable wire, vibrator glue, (stripping pliers, casing, cable ties, sand blasting machine, pipe fittings, etc..


Welding screws: Calculate the position of the vibrator, weld the screws in the cleaned position, and then clean the screws around, vibration cleaning transducer is sure to make them flat, so as not to affect the vibrator installation.


Glue configuration: Stir the glue evenly in the specified proportion. (Merray, Araldite, 4030 glue mixed before bonding, KMD398 glue mixed in the bonding process).


Install the vibrating head: Spread the glue evenly on the bottom of the piezoelectric cleaning transducer, and gently squeeze the air and excess glue between the bottom of the transducer and the bottom contact surface to make the vibrator more tightly integrated with the stainless steel.


Curing and solidification: solidified at a relatively high room temperature, 4-8 hours can be connected, 24 hours after the power can be tested, the test machine is absolutely not allowed to air vibration.


Note:


1. Metal nailing machine can also replace argon arc welding.
2, the welding screws must be fully welded, otherwise it will fall off easily.
3, On the curing of high power cleaning transducer, the length of time should consider the temperature, the temperature is low for a long time, the temperature is high, it is faster, it is recommended to operate at room temperature, even if heated, it does not overheat.


Feedback
Hubei Hannas Tech Co.,Ltd  is a professional piezoelectric ceramics and ultrasonic transducer manufacturer, dedicated to ultrasonic technology and industrial applications.                                    
 

RECOMMEND

CONTACT US

Add: No.302 Innovation Agglomeration Zone, Chibi Avenu ,Chibi City, Xianning, Hubei Province,China
E-mail: sales@piezohannas.com
Tel: +86 07155272177
Phone: +86 +18986196674         
QQ: 1553242848 
Skype: live:mary_14398
​        
Copyright 2017  Hubei Hannas Tech Co.,Ltd All rights reserved. 
Products