Views: 5 Author: Site Editor Publish Time: 2018-04-10 Origin: Site
It is often encountered surface test pieces in the field work, a variety of surface effects on the hardness test results are different in the case of the correct operation, the impact of the sample surface is in the instant and the plane of the sample, so the general support can know that. However, when the curvature is small to a certain size, the rebounding speed of the impacting body is significantly lower due to the difference in the deformed elastic state of the planar condition, so that the hardness meter is shown to be low. Therefore, it is recommended to use a small support . For specimens with a smaller radius of curvature, it is recommended to use a profiled ring.
According to the digital ultrasonic hardness tester principle, as long as the material has a certain degree of rigidity, it can form a rebound, you can measure the exact value of Leeb hardness, but many materials Richter and other standard hardness does not have a corresponding conversion relationship, Leeb hardness tester installed only 9 Material conversion table. Specific materials of shore hardness tester are as follows: steel and cast steel, alloy tool steel, gray cast iron, ductile iron, cast aluminum alloy, copper-zinc alloy, copper-tin alloy, pure copper, stainless copper.
