 |
| Quantity: | |
|---|---|
PS1000K0150
Piezohannas
PS1000K0150
P5 Material Piezo Ceramic Sensor Plate for Acceleration Sensors
WuHan Piezohannas Tech.Co .,Ltd is a manufactuer of piezoelectric ceramics ,ultrasonic transducers and some other components with strong technology force.With a quality management system and research & development sector,our products are extensively used in most applications.
Dimension of Piezoceramic Plate:
dimension:25x 25x 2mm
Material：PZT5A
Application: acceleration sensors
The range of Piezoceramic Plate / Strip:
Length: 1mm-200mm
Width: 1mm-200mm
Height: 0.1mm-30mm
Choice of metallisation (Silver, Nickel, Gold and others on request)
Wide choice of PZT formulations
Piezoelectric Ceramic Material: SOFT PZT (PZT-5A/P-51, PSnN-5, PZT-5H)
P-5A | is a modified soft PZT for general purpose. It is dedicated to low aging rate and extremely stable performance requirement etc. transducers
|
PliS-51 | is a high Curie temperature version of P-51. It is dedicated to low aging rate, extremely stable performance and high frequency requirement etc. transducers |
P-52 | is a modified soft PZT designed for relative high dielectric constant required hydrophone etc. receiver transducers |
P-53 | is developed as high dielectric constant and high Curie point soft PZT particular useful for receiver transducer and actuator etc. applications |
PSnN-5 | is a modified soft PZT , high curie temperature, stable performance requirement etc. transducers, special recommendation distance meansurements.
|
PZT-5H
| is a modified soft PZT dedicated for popular used high dielectric constant, reasonable high Curie point required receiver transducer, ignition and actuator etc. applications |
Nominal Sizes and Tolerances
Geometry | Size (mm) | Tolerance |
Discs | Diameter: 3 to 200 |
Tolerance according to the piezoelectric elements Industrial standard. |
Thickness: 0.2-25 | ||
Tubes | Length: 1-100 | |
OD: 6-180 | ||
ID: 5-150 | ||
Wall: 0.5-15 | ||
Plates | Length: 1-200 | |
Width: 1-200 | ||
Thickness: 0.2-25 | ||
Sphere | OD: 6-160 | |
ID: 4-150 | ||
Wall: 1-10 | ||
Rings | OD: 3-180 | |
ID: 1-150 | ||
Thickness : 0.2-25 | ||
For All Sizes | Flatness | ± 0.03 |
Concentricity | ± 0.10 | |
Perpendicularity | ± 0.10 | |
Parallelism | ± 0.05 |
Nominal Electric Tolerances
Piezoelectric Properties | ± 5% |
Relative Dielectric Constant | ± 15% |
Acceleration Sensors
A piezo-ceramic sensor plate transforms dynamic pressure fluctuations into electrical signals, which can then be processed accordingly. The pressure fluctuation is generated by a seismic mass coupled to the piezo-ceramic part, which applies force to the piezo-ceramic disc when the entire system is accelerated. This system is used for example in dynamic wheel balancing machines where every imbalance in the wheel generates a signal in the piezo-ceramic part. It is then possible to detect and quantify any imbalance in car wheels within seconds and to position appropriate counterweights.
Acceleration Sensors Image
P5 Material Piezo Ceramic Sensor Plate for Acceleration Sensors
WuHan Piezohannas Tech.Co .,Ltd is a manufactuer of piezoelectric ceramics ,ultrasonic transducers and some other components with strong technology force.With a quality management system and research & development sector,our products are extensively used in most applications.
Dimension of Piezoceramic Plate:
dimension:25x 25x 2mm
Material：PZT5A
Application: acceleration sensors
The range of Piezoceramic Plate / Strip:
Length: 1mm-200mm
Width: 1mm-200mm
Height: 0.1mm-30mm
Choice of metallisation (Silver, Nickel, Gold and others on request)
Wide choice of PZT formulations
Piezoelectric Ceramic Material: SOFT PZT (PZT-5A/P-51, PSnN-5, PZT-5H)
P-5A | is a modified soft PZT for general purpose. It is dedicated to low aging rate and extremely stable performance requirement etc. transducers
|
PliS-51 | is a high Curie temperature version of P-51. It is dedicated to low aging rate, extremely stable performance and high frequency requirement etc. transducers |
P-52 | is a modified soft PZT designed for relative high dielectric constant required hydrophone etc. receiver transducers |
P-53 | is developed as high dielectric constant and high Curie point soft PZT particular useful for receiver transducer and actuator etc. applications |
PSnN-5 | is a modified soft PZT , high curie temperature, stable performance requirement etc. transducers, special recommendation distance meansurements.
|
PZT-5H
| is a modified soft PZT dedicated for popular used high dielectric constant, reasonable high Curie point required receiver transducer, ignition and actuator etc. applications |
Nominal Sizes and Tolerances
Geometry | Size (mm) | Tolerance |
Discs | Diameter: 3 to 200 |
Tolerance according to the piezoelectric elements Industrial standard. |
Thickness: 0.2-25 | ||
Tubes | Length: 1-100 | |
OD: 6-180 | ||
ID: 5-150 | ||
Wall: 0.5-15 | ||
Plates | Length: 1-200 | |
Width: 1-200 | ||
Thickness: 0.2-25 | ||
Sphere | OD: 6-160 | |
ID: 4-150 | ||
Wall: 1-10 | ||
Rings | OD: 3-180 | |
ID: 1-150 | ||
Thickness : 0.2-25 | ||
For All Sizes | Flatness | ± 0.03 |
Concentricity | ± 0.10 | |
Perpendicularity | ± 0.10 | |
Parallelism | ± 0.05 |
Nominal Electric Tolerances
Piezoelectric Properties | ± 5% |
Relative Dielectric Constant | ± 15% |
Acceleration Sensors
A piezo-ceramic sensor plate transforms dynamic pressure fluctuations into electrical signals, which can then be processed accordingly. The pressure fluctuation is generated by a seismic mass coupled to the piezo-ceramic part, which applies force to the piezo-ceramic disc when the entire system is accelerated. This system is used for example in dynamic wheel balancing machines where every imbalance in the wheel generates a signal in the piezo-ceramic part. It is then possible to detect and quantify any imbalance in car wheels within seconds and to position appropriate counterweights.
Acceleration Sensors Image
