 |
| Quantity: | |
|---|---|
PS1000K0120
Piezohannas
PS1000K0120
Cost of Piezoelectric Plate Piezoceramic Transducers for SAW Type Transducers
WuHan Piezohannas Tech.Co .,Ltd is a manufactuer of piezoelectric ceramics ,ultrasonic transducers and some other components with strong technology force.With a quality management system and research & development sector,our products are extensively used in most applications.
- Dimensions:14 x 2 x 0.4mm
-Resonant Frequency (MHz):5.40 ± 0.15
-Impedance (Ω):＜20
-Capacitance (pF) :150 ± 20%
SAW Type Transducers Application：
Piezoceramic transducers are used to generate ultrasonic waves which propagate on the surface of the glass plate of a touch panel. When the panel is touched, a portion of the wave is absorbed. This change in the ultrasonic waves is used to determine the position of the touch event. This type of touch panel is known as SAW (surface acoustic wave) type touch panel. piezoceramic plates are developed to be used in SAW type touch panel of various sizes. Custom-made specifications or designs are available.
A SAW type touch panel is made of a pure glass plate with no coating on it. Normally there are 4 piezoelectric ceramic transducers positioned at the corners of the glass plate (2 for transmitting and 2 for receiving ultrasonic signals). The piezoelectric ceramic transducers convert electric signals into ultrasonic waves which are sent to the array of reflectors on the glass surface and the acoustic waves are directed across the glass surface. The receiving piezoelectric transducers gather the directed waves from the reflectors and convert them into electrical signals. The coordinate of the touch point is calculated by comparing the received waveform profile to that of the stored in an untouched condition.
The range of Piezoceramic Rectangle / Square:
Length: 3mm-176mm
Width: 1mm-120mm
Height: 0.1mm-30mm
Applications Image:
Cost of Piezoelectric Plate Piezoceramic Transducers for SAW Type Transducers
WuHan Piezohannas Tech.Co .,Ltd is a manufactuer of piezoelectric ceramics ,ultrasonic transducers and some other components with strong technology force.With a quality management system and research & development sector,our products are extensively used in most applications.
- Dimensions:14 x 2 x 0.4mm
-Resonant Frequency (MHz):5.40 ± 0.15
-Impedance (Ω):＜20
-Capacitance (pF) :150 ± 20%
SAW Type Transducers Application：
Piezoceramic transducers are used to generate ultrasonic waves which propagate on the surface of the glass plate of a touch panel. When the panel is touched, a portion of the wave is absorbed. This change in the ultrasonic waves is used to determine the position of the touch event. This type of touch panel is known as SAW (surface acoustic wave) type touch panel. piezoceramic plates are developed to be used in SAW type touch panel of various sizes. Custom-made specifications or designs are available.
A SAW type touch panel is made of a pure glass plate with no coating on it. Normally there are 4 piezoelectric ceramic transducers positioned at the corners of the glass plate (2 for transmitting and 2 for receiving ultrasonic signals). The piezoelectric ceramic transducers convert electric signals into ultrasonic waves which are sent to the array of reflectors on the glass surface and the acoustic waves are directed across the glass surface. The receiving piezoelectric transducers gather the directed waves from the reflectors and convert them into electrical signals. The coordinate of the touch point is calculated by comparing the received waveform profile to that of the stored in an untouched condition.
The range of Piezoceramic Rectangle / Square:
Length: 3mm-176mm
Width: 1mm-120mm
Height: 0.1mm-30mm
Applications Image:
