45KHz Ultrasonic Transducer for Ultrasonic level meters
Product Description
45KHz Ultrasonic Transducer for Ultrasonic level meters
Technical parameters:
Items | Technical Parameters | Image | |
Name | Ultrasonic transducer |
| |
Model | PHA-45-05T | ||
Frequency | 45KHz±1.5KHz | ||
Detection Distance | 0.3~5m | ||
Minimum Parallel lmpedance | Ω±20% | ||
pF±20% @1KHz | |||
Sensitivity | |||
-40~+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power angle@-3dB:21°±2, Sharp Angle:47°±4 | ||
Housing Material | Weak acid weak base environment can be used (POM) | ||
Usage | Ultrasonic level gauge,Monitoring,Crashproof, Security | ||
The lifting thread:M27*2 | |||
Protection Level | IP68 | ||
Weight | 80g±5% | ||
Wiring Instructions | Integrated interface: red: transducer +, yellow: transducer -, black: shielded wire, (temperature sensor is optional) | ||
Admittance Curve | Product Structure Diagram | ||
|
|
Test Circuit Schematic of Transducer:
Schematic Diagram of Temperature Sensor:
Integrated type Cable Instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Ultrasonic level meters Application:
The ultrasonic level meter is used to continuously monitor level channels in the height of liquid media, sludge or suspensions in both open and closed tanks and channels. The gauge generates the level-height information in the form of a signal current 4 to 20mA. The lower and upper limits of the measurement range can be set by potentiometers in the electronic unit of the gauge.
Application Imgae: