40KHz Anti-corrosion Distance Transducer for Liquidometer
Product Description
40KHz Anti-corrosion Distance Transducer for Liquidometer
Technical parameters:
Items | Technical Parameters | Image | |
Name | 40KHz anti-corrosive transducer PB type (split type) |
| |
Model | PHA-40-12PB-F | ||
Frequency | 40KHz±5% | ||
Detection Distance | 0.5~12m | ||
Minimum Parallel lmpedance | 390Ω±20% | ||
5200pF±20% @1KHz | |||
Sensitivity | Driving Voltage:700Vpp,Distance:0.6m, Echo Amplitude:450mV | ||
-40~+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:10°±2, Sharp Angle:23°±4 | ||
Housing Material | POM、PVDF physical seal | ||
Usage | Ultrasonic level gauge,Monitoring,Crashproof, Security | ||
lifting thread:M32×1.5, Bottom with thread: M60×2 or G2A | |||
Protection Level | IP68 | ||
Weight | 950g±5%(length:10M) | ||
Wiring Instructions | separated type(four-wire):Red: transducer+、white: transducer-、blue,black:temperature sensor(MF58); separated type(Three-wire):Red: transducer+、blue:temperature sensor+、black: Common Line-; | ||
Admittance Curve | Product Structure Diagram | ||
|
Test Circuit Schematic of Transducer: