40KHz High Power Ultrasonic Transducer for Level Sensor

Product Description

               40KHz High Power Ultrasonic Transducer for Level Sensor




Technical parameters:



Items

Technical Parameters

Image

Name

40KHz Anti-corrosion transducer PB type

 

Model

PHA-40-12PB   

Frequency

40KHz±5%

Detection Distance

0.5~12m

Minimum

Parallel lmpedance

320Ω±20%

Capacitance

3400pF±20% @1KHz

 

Sensitivity

Driving Voltage700Vpp,distance:0.6m,

Echo amplitude:530mV

Operating

Voltage

Peak Voltage1500VPP

Operating

Temperature

-40~+80℃

Pressure

≤3Kilos or 0.3MPa

 

Angle

(Beamwidth) Half-power Beam Width@-3dB:10°±2,

Sharp Angle:23°±4

Housing Material

POM、PVDF physical seal

 

Usage

Ultrasonic level gauge,Monitoring,Crashproof,

Security

Installation

Dimension

Bottom with thread: M60×2 or G2A

Protection Level

IP68

Weight

480g±5%

Wiring Instructions

integrated type:connector3PIN,2.54mm terminal ):Red+,White-,Black: shielded wire;

    connector3PIN,2.0mm terminal :white,black:temperature sensor(MF58

Admittance Curve

Product Structure Diagram

 

 



 Block diagram of ultrasonic distance transducer :


Schematic Diagram of Temperature Sensor:


 Integrated type Cable instruction:    :
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +      
White: transducer -         
Black: shielding




2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)


Red and black are temperature sensor wiring



Ultrasonic Level Sensor Application:


Ultrasonic level measurement is a highly cost-effective solution for short- and long-range measurement, even under difficult environmental conditions such as vibrations and dust. Ultrasonic level measurement is a non-contacting technology used in numerous industrial areas to monitor and control the level of liquids, slurries and solids.ultrasonic / level sensors measure distance by using ultrasonic waves.The sensor head emits an ultrasonic wave and receives the wave reflected back from the target. ultrasonic / level sensors measure the distance to the target by measuring the time between the emission and reception.



Feedback

100KHz Anti-corrosion Ultrasonic Transducer for Ultrasonic Level Meter

40KHz Anti-corrosion Ultrasonic Transducer for Ultrasonic Level Meter

40KHz Stainless Steel Ultrasonic Transducer for Level Sensor

36KHz Stainless Steel Explosion-proof Ultrasonic Transducer for Level Sensor

Custom 20KHz Anti-corrosion Ultrasonic Transducer for Level Sensor