Ultrasonic Transducer information
- How to choose ultrasonic cleaning transducerThere are two types of transducers for ultrasonic cleaning, one is a magnetostrictive transducer, and the other is a piezoelectric ring transducer. The electrostrictive transducer has a relatively low electroacoustic efficiency. Moreover, metallic nickel materials are expensive and the manufacturingUltrasonic Transducer information April 16, 2019
- power and frequency selection of ultrasonic cleaning transducerPower selection Ultrasonic cleaning transducer is not necessarily proportional to (power × cleaning time), sometimes with low power, and it takes a long time to remove dirt. And if the power reaches a certain value, the dirt is sometimes removed quickly. If the power is too large, the cavitation intUltrasonic Transducer information April 15, 2019
- Application of Piezoelectric Ceramic Transducer in Ultrasonic Range FinderIn the past 20 years, piezoelectric ceramics transducers have developed rapidly at home and abroad. Due to its simple production, low cost and good stability, it has been widely used in the fields of electronics, light, heat and acoustics, and has a broad development. prospect. Ultrasonic transducerUltrasonic Transducer information March 31, 2019
- Introduction to ultrasonic level sensorUltrasonic level sensor combines three functions of non-contact switch, controller and transmitter. It is suitable for small storage tanks. The flexible design of ultrasonic liquid level sensor can be applied to integrated systems or replace floating ball switches and conductivity switches. PressureUltrasonic Transducer information March 30, 2019
- Hardware design of ultrasonic ranging transducerDesign of single chip circuit:Because the microcontroller integrates the watchdog, CCU comparison unit, analog comparator, A/D converter and other components, it simplifies the circuit design and saves costs.The MCU is powered by +3V and is supplied by the regulator chip HT7130. It uses a 2.4576MHzUltrasonic Transducer information March 30, 2019
- What’s ultrasonic transducerA transducer (probe) is a device that converts physical energy into and out. An ultrasonic probe converts electrical energy into acoustic energy and converts acoustic energy into electrical energy. The energy conversion is realized. Therefore, the ultrasonic probe is also called an ultrasonic transdUltrasonic Transducer information March 28, 2019
- Affecting Factors and extension methods of ultrasonic moldsUltrasonic molds are deformed, cracked, stuck, cracked due to wear, erosion, corrosion and thermal fatigue. After forming burrs, flash, peeling, scratches,roughness and dimensional deviation on the castings, The number of parts that can be processed before being scrapped is called the service life oUltrasonic Transducer information April 25, 2019
- Basic theory of Ultrasonic testing technologyUltrasonic testing technology is a typical non-contact measuring method, which is based on electronics, materials science, physics, etc., and it is widely used. As a type of wave, ultrasonic transducers have all the properties of a wave. Ultrasonic testing is achieved by the physical process of ultrUltrasonic Transducer information March 28, 2019
- Characteristics of ultrasonic sensors and propagation characteristics of ultrasonic wavesIn the industrial production, various sealed liquids are often used to store high-temperature, toxic, volatile, flammable, explosive, and highly corrosive liquid media. For ultrasonic depth transducer of these containers, non-contact measurement must be used.When the ultrasonic level gauge is used fUltrasonic Transducer information March 27, 2019
- Single chip microcomputer of ultrasonic sensorUltrasound refers to mechanical waves with a frequency higher than 20 kHz. In order to use ultrasonic waves as a detecting means, it is necessary to generate ultrasonic waves and receiving ultrasonic waves. The device that performs this function is an ultrasonic sensor, which is customarily called aUltrasonic Transducer information March 26, 2019