Long Range Ultrasonic Transducer for Ultrasonic Level Gauge
Product Description
21Khz Long Range Ultrasonic Transducer for Ultrasonic Level Gauge
Specification:
Items | Technical Parameters | Image | |
Name | Ultrasonic transducer |
| |
Model | PHA-21-30C | ||
Frequency | 21KHz±1.5KHz | ||
Detection Distance | 1.0～30m | ||
Minimum Parallel lmpedance | 530Ω±20％ | ||
11000pF±20％ @1KHz | |||
Sensitivity | Driving Voltage with load：520Vpp，distance:0.6m， Echo Amplitude：400mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (beam width) half power Angle@-3dB:13°±2， Sharp Angle:31°±4 | ||
Housing Material | It can be used in a weak acid or base environment（PC） | ||
Usage | Ultrasonic level gauge,Monitoring,Crashproof, Security | ||
Bottom with thread:M78×2 | |||
Protection Level | IP68 | ||
Weight | 1300g±5％ | ||
Wiring Instructions | integrated type：connector（3PIN,2.54mm terminal ）：Red+，White-，Black: shielded wire； connector（3PIN,2.0mm terminal ）：white,black:temperature sensor（MF58）； | ||
Admittance Curve | Product Structure Diagram | ||
. |
| ||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor:
Integrated type Cable instruction: :
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Ultrasonic Level Gauge Application:
The ultrasonic level meter is used to continuously monitor level channels in the height of liquid media, sludge or suspensions in both open and closed tanks and channels. The gauge generates the level-height information in the form of a signal current 4 to 20mA. The lower and upper limits of the measurement range can be set by potentiometers in the electronic unit of the gauge.