64KHz Anti-corrosive Ultrasonic Transducer for Ultrasonic Liquid Level Sensors
Product Description
64KHz anti-corrosive ultrasonic range finding sensor
Items | Technical Parameters | Image | |
Name | 64KHz anti-corrosive transducer C type
|
| |
Model | PHA-64-05FC | ||
Frequency | 64KHz±5% | ||
Detection Distance | 0.4～5m | ||
Minimum Parallel lmpedance | 310Ω±20％ | ||
Capacitance | 1000pF±20％ @1KHz | ||
Sensitivity | Driving Voltage：880Vpp，Distance:0.6m， Echo Amplitude：200mV | ||
Operating Voltage | Peak Voltage＜1500VPP | ||
Operating Temperature | -40～+80℃ | ||
Pressure | ≤3Kilos or 0.3MPa | ||
Angle | (Beamwidth) Half-power Beam Width@-3dB:4°±2， Sharp Angle:10°±4 | ||
Housing Material | PTFE
| ||
Usage | Ultrasonic level gauge,Monitoring,Crashproof, Security | ||
Installation Dimension | Bottom with thread: M78×2 | ||
Protection Level | IP68 | ||
Weight | 660g±5％ | ||
Wiring Instructions | integrated type：connector（3PIN,2.54mm terminal ）：Red+，White-，Black: shielded wire； connector（3PIN,2.0mm terminal ）：white,black:temperature sensor（MF58）； | ||
Admittance Curve | Product Structure Diagram | ||
| |||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor:
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Ultrasonic Liquid Level Sensors Application:
ultrasonic liquid level sensors use ultrasonic technology to generate a high-frequency sound wave to measure the time for the echo to reflect off of the target and return to the ultrasonic liquid level sensor. The distance from the ultrasonic liquid level sensor to the fluid is then calculated based on the speed of sound and the profile programmed into the sensor.