64KHz Ultrasonic Transducer for Ultrasonic level meters
Product Description
64KHz Ultrasonic Transducer for Ultrasonic level meters
Technical parameters：
Items | Technical Parameters | Image | |
Name | 64KHz ultrasonic transducer E type |
| |
Model | PHA-64-05E | ||
Frequency | 64KHz±5% | ||
Detection Distance | 0.3～5m | ||
Minimum Parallel lmpedance | 600Ω±20％ | ||
930pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：900Vpp，Distance:0.6m， Echo Amplitude：300mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:8°±2， Sharp Angle:19°±4 | ||
Housing Material | ABS | ||
Usage | Ultrasonic level gauge,Monitoring,Crashproof, Security | ||
thread：M38×2 | |||
Protection Level | IP68 | ||
Weight | 69g±5％（ Length：20cm） | ||
Wiring Instructions | integrated type：Red+，White-，Black: shielded wire；
| ||
Admittance Curve | Product Structure Diagram | ||
| |||
Test Circuit Schematic of Transducer:
Ultrasonic Level Meters Application:
The ultrasonic level meter is used to continuously monitor level channels in the height of liquid media, sludge or suspensions in both open and closed tanks and channels. The gauge generates the level-height information in the form of a signal current 4 to 20mA. The lower and upper limits of the measurement range can be set by potentiometers in the electronic unit of the gauge.
Application Image: