Underwater Sludge Ranging Transducer for Depth Measurement Equipment

Product Description

    Underwater Sludge Ranging Transducer for Depth Measurement Equipment

 

1.Technical parameters:


Items

Technical Parameters

Image

Name

200KHz-50KHz underwater ranging transducer

 sludge interface instrument ultrasonic transducer-PTFE

 

 

Model

PHW-50/200-NC

Frequency

200KHz±5%/50KHz±5%

Detection Distance

200KHz 0.6120m

50KHz  3500m

Minimum

Parallel lmpedance

600Ω±20

Capacitance

4300pF±20@1KHz

 

Sensitivity

Driving Voltage:600Vpp、Distance:0.8m、

Echo Amplitude:15 V(200KHZ)

Operating

Voltage

Peak Voltage<600VPP

Operating

Temperature

-40+80℃

Pressure

3Kilos or 0.3MPa

 

Angle

(Beamwidth) Half-power Beam Width@-3dB:7.5°±1,

Sharp Angle:17.5°±2(200KHZ)

(Beamwidth) Half-power Beam Width@-3dB:27°±2,

Sharp Angle:68°±4(50KHZ)

Housing Material

 PTEF

 

Usage

ultrasonic flowmeter,submarine range finder

Installation

Dimension

See the product structure drawing

Protection Level

IP68

Weight

900g±5%(Length10m

Wiring Instructions

(three lines): red: transducer +, blue: temperature sensor +, black: public -;

Admittance Curve

Product Structure Diagram

 

 



2.Temperature Sensor Schematic Diagram of Transducer , Test Circuit Schematic Diagram





 

3.Development Board:



DYSTM32F4 high frequency ultrasonic development board is based on STM32F407VGT6 microcontroller, including an onboard JLINK interface, 2 LEDs, 3 independent buttons, LCD12864 display interface, original ultrasonic transmitting circuit, original ultrasonic receiving circuit, UART asynchronous serial port + MAX232  level conversion chip, temperature sensor MF58 interface.


The STM32F407VGT6 microcontroller is an ARM Cortex-M4 core, 32-bit MCU with FPU unit, 210 DMIPS, up to 1MB FLASH/192+4KB RAM, 17 timers, 3 ADCs, 15 communication interfaces and a camera mouth.


DYSTM32F4 high-frequency ultrasonic development board, can be used for ultrasonic underwater bathymetry, early development of fish exploration; can do short-distance, high-speed underwater acoustic communication experiments; can be used for early development of ultrasonic ranging products, related experiments of ultrasonic sensors, It can be applied to car reversing, construction site and some industrial site for pre-development of position monitoring. It can also be used for pre-development and application in areas such as liquid level, well depth and pipe length measurement.


Feedback

500KHz Ultrasonic Depth Transducer 30m Depth Measurement for Ultrasonic Flowmeter

400KHz Long Range Ultrasonic Depth Transducer for Ultrasonic Flowmeter

300KHz Long Range 50M Depth Transducer Mud Level Transducer

110KHz underwater ultrasonic transducer for ultrasonic flowmeter

28KHz underwater horizonally-polarized ultrasonic depth transducer for submarine range finder