Ultrasonic Transducer 8M Distance for Ultrasonic Level Measurement

Product Description

Ultrasonic Transducer 8M Distance for Ultrasonic Level Measurement

Technical parameters：

Items	Technical Parameters		Image
Name	Ultrasonic transducer for 12m distance（integrated type）
Model	PHA-40-12C
Frequency	40KHz±1.5KHz
Detection Distance	0.5～12m
Minimum Parallel lmpedance	250Ω±20％
Capacitance	2000pF±20％ @1KHz
Sensitivity	Driving Voltage：700Vpp，Distance:0.6m， Echo Amplitude：500mV
Operating Voltage	Peak Voltage＜1500VPP
Operating Temperature	-40～+80℃
Pressure	≤3Kilos or 0.3MPa
Angle	(Beamwidth) Half-power Beam Width@-3dB:7°±2， Sharp Angle:16°±4
Housing Material	used in the weak acid or weak base environment（PC）
Usage	Ultrasonic level gauge,Monitoring,Crashproof, Security
Installation Dimension	Bottom with thread:M78×2
Protection Level	IP68
Weight	710g±5％
Wiring Instructions	integrated type：connector（3PIN,2.54mm terminal ）：Red+，White-，Black: shielded wire； connector（3PIN,2.0mm terminal ）：white,black:temperature sensor（MF58）；
Admittance Curve		Product Structure Diagram

Test Circuit Schematic of Transducer:

Ultrasonic Level Measurement Transducer

Ultrasonic level measurement is a highly cost-effective solution for short- and long-range measurement, even under difficult environmental conditions such as vibrations and dust. Ultrasonic level measurement is a non-contacting technology used in numerous industrial areas to monitor and control the level of liquids, slurries and solids.

ultrasonic level transducer emits acoustic pulses in a narrow beam perpendicular to the transducer face. The level transceiver measures the propagation time between pulse emission and reception of the echo to calculate the distance from the transducer to the material. Variations in sound velocity due to changes in temperature within the permissible range are automatically compensated by the integral temperature sensor.

Application Image:

Ultrasonic Transducer 8M Distance for Ultrasonic Level Measurement

Product Description

Related Products