Titanium Alloy Housing Ultrasonic Gas Flow Transducer for Gas Flow Measurement
Product Description
Titanium Alloy Housing Ultrasonic Gas Flow Transducer for Gas Flow Measurement
Technical parameters:
Items | Technical Parameters | Image | |
Name | 200KHz ultrasonic transducer |
| |
Model | PHAU-200-01CA | ||
Frequency | 200KHz±5% | ||
Detection Distance | 0.10～1m | ||
Minimum Parallel lmpedance | 300Ω±20％ | ||
850pF±20％ @1KHz | |||
Sensitivity | No load driving voltage:：200Vpp，Distance:0.3m， Echo Amplitude:5mV | ||
-40～+80℃ | |||
≤16Kilos or 1.6MPa | |||
(Beamwidth)Half-power Beam Width@-3dB:10.1°±10%， Sharp Angle:23.9°±10% | |||
Housing Material | titanium alloy | ||
usage | ultrasonic gas flowmeter | ||
Protection Level | IP68 | ||
Weight | 24.2g±5％（wire length：80cm） | ||
Wiring Instructions | interface: red: transducer +, white: transducer -, black: shielded wire, ( temperature sensor is optional) | ||
Admittance Curve | Product Structure Diagram | ||
|
| ||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Application for Ultrasonic Gas Flowmeter :
Industrial gas flow meters are widely utilised for liquid and water applications, it has long been accepted that clamp on gas flowmeter technology could not be applied to mass gas flow measurement primarily due to fundamental theoretical measurement limits. the transmitted sound energy is received by traditional ultrasonic transducers. The gas ultrasonic flow measurement products are used around the world in a variety of critical gas measurement applications. Commonly installed in onshore and offshore production facilities, natural gas transmission pipelines, compressor stations, processing facilities and city gates, these products are also useful for applications that consume large volumes of natural gas as a fuel or feedstock such as power generation, refining, processing and petrochemical industries.
Production Department