Titanium Alloy Housing 500KHz Ultrasonic Transducer Flow Measurement for Ultrasonic Flowmeter
Product Description
Titanium Alloy Housing 500KHz Ultrasonic Transducer Flow Measurement for Ultrasonic Flowmeter
Items | Technical Parameters | Image | |
Name | 500KHz transducer |
| |
Model | PHA-500F-01 | ||
Frequency | 500KHz±25KHz | ||
Detection Distance | 0.3～30m | ||
Minimum Parallel lmpedance | 220Ω±20％ | ||
1200pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：24 Vpp、Distance：0.3m、 Echo Amplitude:500 mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
(Beamwidth)Half-power Beam Width@-3dB:7.5°±1， Sharp Angle：18°±2 | |||
Housing Material | Titanium alloy | ||
Usage | Ultrasonic flowmeter,submarine range finder | ||
Checking product structure diagram below | |||
Protection Level | IP68 | ||
Weight | 90g±5％（Length：1M） | ||
Wiring Instructions | Red:transducer+，White:transducer-,Black: shielded wire （without temperature sensor ）） | ||
Admittance Curve | Product Structure Diagram | ||
| |||
Ultrasonic Flow Meter Application:
An ultrasonic flow meter can be defined as, a meter that is used to measure liquid velocity with ultrasound to analyze the volume of liquid flow. This is a volumetric flow meter that needs bubble or minute particles within the liquid flow. These meters are suitable in the applications of wastewater but they will not work with drinking/distill water. So this type of flow meter is ideal for the applications wherever chemical compatibility, low maintenance, and low-pressure drop are required.