Stainless Steel 200KHz Ultrasonic Transducer for Ultrasonic Gas Flowmeter
Product Description
Stainless Steel 200KHz Ultrasonic Transducer for Ultrasonic Gas Flowmeter
Items | Technical Parameters | Image | |
Name | 200KHz ultrasonic transducer |
| |
Model | PHA-200-01VG | ||
Frequency | 200KHz±5% | ||
Detection Distance | 0.10～1.5m | ||
Minimum Parallel lmpedance | 660Ω±20％ | ||
570pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：800Vpp，Distance:0.3m， Echo Amplitude：35mV | ||
-40～+80℃ | |||
≤1Kilos or 0.1MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:7.2°±2， Sharp Angle:17.1°±4 | ||
Housing Material | composite material | ||
Usage | anemorumbometer,gas flowmeter | ||
See the structure diagram | |||
Protection Level | IP68 | ||
Weight | 14g±5％（Length：25cm） | ||
Wiring Instructions | integrated type：Red+，White-，Black: shielded wire；Temperature Sensor is optional
| ||
Admittance Curve | Product Structure Diagram | ||
|
| ||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor:
Integrated type Cable instruction: :
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding