This product has been off the shelf!
Monoaxial IEPE Piezoelectric Accelerometers Transducer To Measure Displacement
Product Description
Monoaxial IEPE Piezoelectric Accelerometers Transducer To Measure Displacement
Feature：
Built-in IC preamplifier
Matched with coaxial cable and constant-current adjustor
Simplify measurement system
Small scale
Specifications:
Axial Sensitivity(20±5℃) | 20mV/ g |
Measurement Range(peak) | 250 g |
Transverse Sensitivity | ≤5 ％ |
Frequency Response(0.5dB) | 1～10,000 Hz |
Mounting Resonance Frequency | 40,000 Hz |
Temperature Response | Refer to the temp. curve |
Polarity | Positive |
Operating Temp. Range | -40～+120 ℃ |
Shock Limit | 3,000g |
Operating Voltage (constant-current source) | +12～+28 V（DC） |
Operating Current | +2～+10 mA（typical 4mA ） |
Output Signal (peak) | ≤6V |
Noise(1 to 20kHz) | ＜0.5 mg |
Base Strain Sensitivity | 0.2mg/με |
Magnetic Sensitivity | 1.5g/T |
Thermal Transient Sensitivity | 10mg/℃ |
Output Impedance | ＜100 Ω |
DC Offset Voltage | 12±2 VDC/7±1 VDC (inform when making orders) |
Weight | 9g |
Case Material | Stainless steel |
Mounting Method | M5 |
Sensing Element | PZT-5 |
Structural Design | Loop shear |
Output | L5 |
Accessories: | |
Sensor Certificate | Calibration parameter, frequency response curve |
M5 bolt,Protection cap | one |
Cable: STYV-1 with L5/BNC(2m length) | one |
Image:
Circuit diagram
Typical Temperature Response
Typical Frequency Response