This product has been off the shelf!
Industrial Monitor IEPE Accelerometers Transducer with Isolated Output
Product Description
Industrial Monitor IEPE Accelerometers Transducer with Isolated Output
Feature:
Built-in IEPE isolation voltage output
High Anti-interference ability
Isolated output,Industrial Monitor
Specifications:
Axial Sensitivity(20±5℃) | 100mV/g |
Measurement Range(peak) | ±50 g |
Transverse Sensitivity | ≤5 % |
Frequency Response(0.5dB) | 0.6 to 6,000 Hz |
Mounting Resonance Frequency | 20,000 Hz |
Polarity | Positive |
Operating Temp. Range | -40 to +120 ℃ |
Shock Limit | 3,000g |
Operating Voltage (constant-current source) | +18 to +28 V(DC) |
Operating Current | +2 to +10mA(typical 4mA) |
Output Signal (peak) | ≤6V |
Noise | <20μV |
Base Strain Sensitivity | 0.4mg/με |
Magnetic Sensitivity | 0.6g/T |
Thermal Transient Sensitivity | 150mg/℃(0.3Hz) |
Output Impedance | <100 Ω |
DC Offset Voltage | 12±2 VDC |
Weight | 80g |
Case Material | 304 Stainless steel |
Mounting Method | 1/4-28 |
Sensing Element | PZT-5 |
Structural Design | Shear |
Output | Top 5/16-24, 2-Cores Socket |
Accessories: | |
Sensor Certificate | Calibration parameter, frequency response curve |
1/4-28 Stud | one |
5015 Plug, Cable (RVVP) - 3m | one |
Image:
Circuit diagram
Typical Temperature Response
Frequency Response