This product has been off the shelf!
High Quality Monoaxial Iepe Accelerometers To Measure Displacement
Product Description
High Quality Monoaxial Iepe Accelerometers To Measure Displacement
Feature：
Built-in IC preamplifier
Matched with coaxial cable and constant-current adjustor
Simplify measurement system
High Sensitivity
Specifications:
Axial Sensitivity(20±5℃) | 50mV/g |
Measurement Range(peak) | 100 g |
Transverse Sensitivity | ≤5 % |
Frequency Response(0.5dB) | 0.5 to 5,000 Hz |
Mounting Resonance Frequency | 20,000 Hz |
Polarity | Positive |
Operating Temp. Range | -40 to +120 ℃ |
Shock Limit | 3,000g |
Operating Voltage (constant-current source) | +18 to +28 V(DC) |
Operating Current | +2 to +10mA(typical 4mA) |
Output Signal (peak) | ≤6V |
Noise(1 to 20kHz) | ＜0.5 mg |
Base Strain Sensitivity | 0.6mg/με |
Magnetic Sensitivity | 2g/T |
Thermal Transient Sensitivity | 0.1mg/℃ |
Output Impedance | ＜100 Ω |
DC Offset Voltage | 12±2 VDC |
Weight | 25g |
Case Material | Stainless steel |
Mounting Method | M5 |
Sensing Element | PZT-5 |
Structural Design | Shear |
Output | TNC |
Accessories: | |
Sensor Certificate | Calibration parameter, frequency response curve |
M5bolt,Protection cap | one |
Double-ended L5(2m) STYV-1 | one |
Image:
Circuit diagram
Typical Temperature Response
Typical Frequency Response