This product has been off the shelf!
High Quality Monoaxial IEPE Accelerometers To Measure Vibration
Product Description
High Quality Monoaxial IEPE Accelerometers To Measure Vibration
Feature：
Built-in IEPE pre-amplifier;
Small size ,light weight;
High Shock.wide frequency response.
Specifications:
Axial Sensitivity(20±5℃) | 1mV/g （1 to 5 mV/g customized） |
Measurement Range(peak) | 5000g |
Transverse Sensitivity | ≤5 % |
Frequency Response(0.5dB) | 1 to 12,000 Hz |
Mounting Resonance Frequency | 45,000 Hz |
Temperature Response | Refer to the temperature curve |
Polarity | Positive |
Operating Temp. Range | -40 to +120 ℃ |
Shock Limit | 5,000g |
Operating Voltage (constant-current source) | +18 to +28 V(DC) |
Operating Current | +2 to +10 mA(typical 4 mA) |
Output Signal (peak) | ≤6V |
Noise(1 to 20kHz) | ＜8 mg |
Base Strain Sensitivity | 5mg/με |
Magnetic Sensitivity | 0.5g/T |
Thermal Transient Sensitivity | 4mg/℃ |
Output Impedance | ＜100 Ω |
DC Offset Voltage | 12±2 VDC(Normal); 7±1 VDC/ (inform when making orders) |
Weight | 10g |
Case Material | Stainless steel |
Mounting Method | M5 |
Sensing Element | PZT-5 |
Structural Design | Loop shear |
Output | L5 |
Accessories: | |
Sensor Certificate | Calibration parameter, frequency response curve |
M5bolt,Protection cap | one |
Double-ended L5(2m) STYV-1 | one |
Image:
Circuit diagram
Typical Temperature Response
Typical Frequency Response