Custom PVDF Housing Piezoelectric Ultrasonic Transducer for Ultrasonic Level Gauge
Product Description
Custom PVDF Housing Piezoelectric Ultrasonic Transducer for Ultrasonic Level Gauge
Technical parameters:
Items | Technical Parameters | Image | |
Name | 200KHzultrasonic transducer |
| |
Model | PHAU-200-01FA | ||
Frequency | 200KHz±5% | ||
Detection Distance | 0.10～1.5m | ||
Minimum Parallel lmpedance | 900Ω±20％ | ||
600pF±20％ @1KHz | |||
Sensitivity | No load driving voltage:：200Vpp，Distance:0.3m， Echo Amplitude:5mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
(Beamwidth)Half-power Beam Width@-3dB:6.7°±10%， Sharp Angle:15.8°±10% | |||
Housing Material | PVDF | ||
usage | Ultrasonic level gauge, monitoring, anti - collision, security | ||
Protection Level | IP68 | ||
Weight | 6.3g±5％（wire length：15cm） | ||
Wiring Instructions | interface: red: transducer +, white: transducer -, black: shielded wire, ( temperature sensor is optional) | ||
Admittance Curve | Product Structure Diagram | ||
| |||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor
Ultrasonic Level Sensor Application
Offered in general purpose and intrinsically safe versions, the ultrasonic level sensor provides reliable level measurement of non-foaming chemical, water, wastewater and petroleum based liquids in ambient tank or sump applications from 1-12 meters. How does an ultrasonic level sensor work? The ultrasonic level sensor emits a high frequency acoustic pulse from its transducer. The pulse travels through the air gap, reflects against the liquid surface and returns to the transducer. The ultrasonic level sensor measures the pulse time of flight and converts this into level height or distance.
Production Department