Custom 650KHz Ultrasonic Transducer for Ultrasonic Sludge Sensor
Product Description
Custom 650KHz Ultrasonic Transducer for Ultrasonic Sludge Sensor
Items | Technical Parameters | Image | |
Name | 650KHz transducer for mud level measurement
|
| |
Model | PHA-650-3A | ||
Frequency | 650KHz±30KHz | ||
Detection Distance | 0.3～25m | ||
Minimum Parallel lmpedance | 80Ω±20％ | ||
3300pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：24 Vpp、Distance：0.3m、 Echo Amplitude：500 mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
(Beamwidth)Half-power Beam Width@-3dB:6.8°±1， Sharp Angle:16.1°±2 | |||
Housing Material | POM | ||
Usage | Ultrasonic flowmeter,submarine range finder | ||
Checking product structure diagram below | |||
Protection Level | IP68 | ||
Weight | 455g±5％（Length：10m） | ||
Wiring Instructions | Red： transducer＋,Black：transducer－ ,Temp transducer－ ,Blue Temp transducer＋ | ||
Admittance Curve | Product Structure Diagram | ||
| |||
Ultrasonic Sludge Sensor Application :
Sludge level sensors and transmitters help you to pump sludge, not water. They continuously monitor the separation and transition zones of the clarification and settling phases, so that you can operate your process efficiently. Typical installations are at the primary and secondary clarifier of wastewater treatment plants to measure sludge level / sludge blanket level. Check out our sludge level sensor and transmitter portfolio for your sedimentation tanks by clicking on the button below.
Production Department: