Clamp-on 1MHz Ultrasonic Flowmeter Transducer for Flow Measurement
Product Description
Clamp-on 1MHz Ultrasonic Transducer for Flow Measurement
Specifications:
Items | Technical Parameters | Image | |
Name | Ultrasonic Transducer for flowmeter (mounted outside)
|
| |
Model | PHW-1M-01S | ||
Frequency | 1MHz±30KHz | ||
Detection Distance | 0.05 ～ 3m | ||
Minimum Parallel lmpedance | 40Ω±20％ | ||
3400pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：24 Vpp、Transmitting and Receipting , Bijection distance： 45cm、Receipting amplitude ：750 mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
Housing Material | 304stainless steel、composite material | ||
Usage | Ultrasonic flowmeter(mounted outside)
| ||
Checking product structure diagram | |||
Protection Level | IP68 | ||
Weight | 600g±5％（Length：10m） | ||
Wiring Instructions | Red:transducer+，White:transducer-,Black: shielded wire （ temperature sensor is optional） | ||
Admittance Curve | Product Structure Diagram | ||
| |||
Installation of ultrasonic transducer :
Clamp-on ultrasonic flowmeter Application:
Clamp-on ultrasonic flowmeters showcase the benefits of digital signal processing: market-leading accuracy, noise immunity and reliability. Need more convincing? There’s also the high-speed data update rate and superior user-friendliness at every stage of installation and operation. With no pressure drop or energy loss, a wide turndown ratio and non-intrusive sensors that can be installed without cutting into the pipe – you can’t go wrong with clamp-on for liquid flow measurement.