75KHz Ultrasonict Transducer for Distance Measurement

                                         75KHz Ultrasonict Transducer for Distance Measurement

Introduction:

 

PH75F0256 ultrasonic sensor has the functions of transmitter and receiver. It’s a long range type, generally can be used for ultrasonic range finder, ultrasonic sensor for non-contact detect objects, ultrasonic distance sensor, ultrasonic liquid level sensor, etc. If you have any questions for other applications, please contact us for details.

Technical parameters：

Outline Dimension：

Frequency-Resistance Curve：

Frequency-Phase Angle Curve：

 

 

Sensitivity Test:

 

Transmitting voltage:200Vp-p; period: 50; distance: 40CM

 

Directivity Curve：

Characteristic:

 

1.Solid package (ABS or Aluminum alloy shell)

2.Installation expediently (M20*1.5 Screw)

Application:

1.Position Location

2.Approach measurement

3.Traffic Measurement

4.Avoiding Obstacles

Notice and Storage:

1.  Please do not apply D.C.voltage for ultrasonic sensors to avoid migration.

2.  Because the sensors have potential direction, please pay attention to its installation location.

3. To ensure reliability and long service life, do not use the sensors where temperature is higher than the rated.

4.  Can not use the sensors in a vacuum zone or hazardous areas.

5.  Do not use in a steam zone, the area of the atmosphere produce uneven temperature gradient will lead to measurement error.

6. The products should not be used or stored in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. Store the products in the room where is normal temperature and humidity, and avoid the sunlight, sudden changes in temperature and humidity. It may cause of failure or malfunction in such conditions.

7. If you will apply to non-standard frequency and other special conditions, please inform us the specific work conditions and the circuit you need, in order to make sensors to meet your specific requirements.