600KHz Ultrasonic Transducer 30m Depth Measurement for Ultrasonic Flowmeter

600KHz Ultrasonic Transducer 30m Depth Measurement for Ultrasonic Flowmeter

Technical parameters:

Block diagram of ultrasonic transducer :

Schematic Diagram of Temperature Sensor (model: MF58_502F3470):


Integrated type Cable instruction:   

1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +      
White: transducer -         
Black: shielding


2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)

Red and black are temperature sensor wiring

Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB

Three-core wiring instructions:                
                        
    Red: Transducer +
     Blue: temperature sensor +
     Black: Public-

 Four-core wiring instructions:

Red: Transducer +                      
Yellow: Transducer-
Blue, black: temperature sensor

Ultrasonic Flowmeter Application:

Ultrasonic flow meters have many applications, from process flow to custody flow. It is also a common practice to use a clamp-on ultrasonic flow meter to verify other flow meters or for temporary measurement. The article explains what you need to know about the basics of ultrasonic flow measurement and its applications.There are two types of ultrasonic flow meters: Doppler and transit time ultrasonic flow meters. But first, let’s find out more about the working principle. Then we can go through in-depth variations and typical uses. Later, we will highlight the pros and cons and give examples of brands on the market.