2MHz Ultrasonic Fuel Level Transducer for Oil Level Gauge
Product Description
2MHz Ultrasonic Fuel Level Transducer for Oil Level Gauge
Items | Technical Parameters | Image | |||
Name | Ultrasonic transducer for automobile tank oil level(mounted outside) |
| |||
Model | PL-2M-01F | ||||
Frequency | 2MHz±30KHz | ||||
Detection Distance | 0.03 ～ 2m | ||||
Minimum Parallel lmpedance | 10Ω ±20％ | ||||
Capacitance | 2300pF±20％ @1KHz | ||||
Sensitivity | Driving Voltage：24 Vpp、Distance： 0.3m、 Echo Amplitude:900 mV | ||||
Operating Voltage | Peak | Voltage＜150VPP | |||
Operating Temperatur e | -40～+80℃ | ||||
Pressure | ≤3Kilos or 0.3MPa | ||||
Angle | (Beamwidth)Half-power Beam Width@-3dB:2.4°±0.5， Sharp Angle:5.7°±1 | ||||
Housing Material | 2A12 | ||||
Usage | Detecting oil level of fuel tank , submarine range finder | ||||
Installation Dimension | Checking product structure diagram below | ||||
Protection Level | IP68 | ||||
Weight | 240g±5％（Length：5M+1M） | ||||
Wiring Instructions | Wiring Instructions： 1 → negative electrode of piezoelectric ceramics 2 → positive electrode of piezoelectric ceramics 3 → MF58 temperature 4 → MF58 temperature | ||||
| |||||
Admittance Curve | Product Structure Diagram | ||||
|
|
Ultrasonic Fuel Level Transducer:
This ultrasonic fuel level detector uses the ultrasonic detection technology to measure the height of fuel level in container and output a standard electrical signal after through circuit processing. Ultrasonic sensors outer adheres on the bottom of the fuel tank and no need directly to contact with the fuel level that could be real-time detection the height of fuel level. It could be widely used in various types of vehicles for fuel measuring and monitoring, also could be combined with GPS/GPRS communication technology, through the computer software management platform to achieve scientific management vehicles, prevent fuel theft behavior and save the vehicle operating cost.
Application Image: