2KHz Underwater Ultrasonic Transducer for Ultrasound Drive The Fish
Product Description
650KHz Piezoelectric Ultrasonic Transducer for Ultrasonic Flowmeter
Technical parameters:
Items | Technical Parameters | Image | |
Name | 2KHz underwater ultrasonic transducer |
| |
Model | PHW-700Hz-1000A | ||
Frequency | 2KHz±5% | ||
Minimum Parallel lmpedance | 1800Ω±20％ | ||
37200pF±20％ @1KHz | |||
Sensitivity | 24V Sinusoidal drive、distance：0.05m 、 Receiving and sending ,Receiving amplitude：100 mV | ||
-40～+80℃ | |||
≤10Kilos or 1MPa | |||
Housing Material | stainless steel | ||
usage | Ultrasound Drive the fish | ||
See product structure drawing for details | |||
Protection Level | IP68 | ||
Weight | 3800g±5％（wire length：2m） | ||
Wiring Instructions | Red: transducer +, black: transducer - | ||
Admittance Curve | Product Structure Diagram | ||
| |||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor