200Khz Ultrasonic Wind Speed Transducer for Ultrasonic Anemometer

Product Description

200Khz Ultrasonic Wind Speed Transducer for Ultrasonic Anemometer

Items	Technical Parameters		Image
Name	200KHz ultrasonic transducer
Model	PHA-200-01KG
Frequency	200KHz±5%
Detection Distance	0.10～1.5m
Minimum Parallel lmpedance	600Ω±20％
Capacitance	800pF±20％ @1KHz
Sensitivity	Driving Voltage：800Vpp，Distance:0.3m， Echo Amplitude：25mV
Operating Voltage	Peak Voltage＜1000 VPP
Operating Temperature	-40～+80℃
Pressure	≤3Kilos or 0.3MPa
Angle	(Beamwidth) Half-power Beam Width@-3dB:8.4°±2， Sharp Angle:20°±4
Housing Material	POM
Usage	Anemorumbometer ,gas flowmeter
Installation Dimension	thread：M8*1
Protection Level	IP68
Weight	10g±5％（Length：25cm）
Wiring Instructions	integrated type：connector：Red+，White-，Black: shielded wire；
Admittance Curve		Product Structure Diagram

Application for Ultrasonic Anemometer Sensor:

Ultrasonic anemometer has all digital signal detection, high accuracy, automatically heating ability to remove snow and ice .It is the anemometer with real-time measurement of wind speed, wind direction and acoustic temperature.Ultrasonic anemometer takes four ultrasonic sensors in the two-dimensional plane to send and receive ultrasonic signals; it is an instrument using the difference of the ultrasonic spread time in the air to measure wind speed and wind direction.Ultrasonic anemometer calculates the wind speed according to the difference of the sound spread time in the air; then calculates the temperature according to the physical relationship between temperature and sound speed.

Application Image of Ultrasonic Anemometer Sensor:

Our four transducers are fix on the holder of anemometer

200Khz Ultrasonic Wind Speed Transducer for Ultrasonic Anemometer

Product Description

Related Products