200KHz ultrasonic distance transducer for wind air speed

                200KHz Ultrasonic Distance Transducer for Wind Air Speed

 

Introduction:

 

PH200F011 has the functions of transmitter and receiver.It generally can be used for ultrasonic wind sensor for ultrasonic anemometer to intelligently measure wind speed and direction, widely be used in meteorological monitoring, bridges, tunnel, mine and mariners, etc. If you have any questions for other applications, please contact us for details.

Technical parameters：

Outline Dimension：

Test Circuit：

 

 

Features of ultrasonic sensors:

 

1.Small size and light-weight

2. High sensitivity and high sound pressure

3.Low power consumption

4.High reliability

Notice:

1, Please do not apply D.C.voltage for ultrasonic sensors to avoid migration.
2, Because the sensors have potential direction, please pay attention to its installation
location.
3, To ensure reliability and long service life, do not use the sensors where temperature is
higher than rated.
4, Can not use the sensors in a vacuum zone or hazardous areas.
5, Do not use in a steam zone, this area of the atmosphere produce uneven temperature
gradient will lead to measurement error.
6, The products should not be used or stored in a corrosive atmosphere, especially where
chloride gas, sulfide gas, acid, alkali, salt or the like are present. Store the products in the

room where is normal temperature and humidity, and avoid the sunlight, sudden changes
in temperature and humidity. It may cause of failure or malfunction in such conditions.
7, If you will apply to non-standard frequency and other special conditions, please inform
us the specific work conditions, the circuit you need, in order to make sensors to meet
your specific requirements.