200KHz Ultrasonic Transducer for Ultrasonic Anemorumbometer
Product Description
200KHz Ultrasonic Transducer for Ultrasonic Anemorumbometer
Technical parameters:
Items | Technical Parameters | Image | |
Name | 200KHz ultrasonic transducer |
| |
Model | PHA-200-01KF | ||
Frequency | 200KHz±5% | ||
Detection Distance | 0.10～1.5m | ||
Minimum Parallel lmpedance | 455Ω±20％ | ||
1410pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：800Vpp，Distance:0.3m， Echo Amplitude:30mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:10°±10%， Sharp Angle:24°±10% | ||
Housing Material | POM | ||
Usage | anemorumbometer,ultrasonic gas flowmeter | ||
thread：M12*1.5 | |||
Protection Level | IP68 | ||
Weight | 10g±5％（Length：25cm） | ||
Wiring Instructions | integrated type：connector：Red+，White-，Black: shielded wire； | ||
Admittance Curve | Product Structure Diagram | ||
| |||
Block diagram of ultrasonic distance transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor
Application Image :