200KHz Ultrasonic Transducer Wind Vane for Ultrasonic WeatherStation
Product Description
200KHz Ultrasonic Transducer Wind Vane for Ultrasonic WeatherStation
Items | Technical Parameters | Image | |
Name | 200KHz ultrasonic transducer |
| |
Model | PHA-200-01K | ||
Frequency | 200KHz±5% | ||
Detection Distance | 0.10～1.5m | ||
Minimum Parallel lmpedance | 2300Ω±20％ | ||
370pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：800Vpp，Distance0.3m， Echo Amplitude25mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:10°±2， Sharp Angle:23°±4 | ||
Housing Material | POM | ||
Usage | anemorumbometer,gas flowmeter | ||
thread：M12*1.5 | |||
Protection Level | IP68 | ||
Weight | 10g±5％（length：10cm） | ||
Wiring Instructions | integrated type：Red+，White-，Black: shielded wire(default: without temperature sensor) | ||
Admittance Curve | Product Structure Diagram | ||
|
| ||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor:
Integrated type Cable instruction: :
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Application for Ultrasonic WeatherStation:
The ultrasonic weather station instrument is the only all-in-one weather sensor that calculates apparent wind speed and direction, barometric pressure, air temperature, relative humidity, dew point and wind chill temperature. With the optional internal compass and Global Positioning System, true wind speed and direction can also be calculated. The UV stabilized, compact housing is fully waterproof and resistant to chemicals. Usually the main body of the wind direction sensor adopts the mechanical structure of the wind vane.
Application Image of Ultrasonic WeatherStation