1Mhz Pizoelectric Transducer Ultrasonic Transducer Depth Measurement for 3M Depth
Product Description
1Mhz Pizoelectric Transducer Ultrasonic Transducer Depth Measurement for 3M Depth
Technical parameters:
Items | Technical Parameters | Image | |
Name | 1Mhz ultrasonic transducer |
| |
Model | PHYW-1M-02M
| ||
Frequency | 1MHz±5% | ||
Detection Distance | 0.05 ～ 3m | ||
Minimum Parallel lmpedance |
40Ω±20％
| ||
1450pF±20％ @1KHz
| |||
Sensitivity | No Driving Voltage：24V、 Distance：0.3m、 Echo Amplitude：1000 V | ||
-40～+80℃ | |||
≤3 Kilos or 0.3MPa | |||
| (Beamwidth)Half-power Beam Width @-3dB:4.6°±10%， Sharp Angle:10.7°±10% | ||
Housing Material | PI | ||
Usage |
Depth measurement... | ||
According to Product Structure Diagram | |||
Protection Level | IP68 | ||
Weight | 11g±5％（Length：15cm） | ||
Wiring Instructions | White+，Black - ( temperature sensor is optional) | ||
Admittance Curve | Product Structure Diagram | ||
| |||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor (model: MF58_502F3470):
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
2.Cable Instruction of Temperature Sensor: interface (3pin, 2.0mm terminal)
Red and black are temperature sensor wiring
Split type: standard 10m cable, with each additional 50m of cable, the signal attenuation is 6dB
Three-core wiring instructions:
Red: Transducer +
Blue: temperature sensor +
Black: Public-
Four-core wiring instructions:
Red: Transducer +
Yellow: Transducer-
Blue, black: temperature sensor