1MHz underwater ultrasonic depth transducer for submarine range finder
Product Description
1MHz Underwater Ultrasonic Depth Transducer for Submarine Range Finder
1. Introduction
Underwater sounder transducer uses ultrasonic waves to transmits underwater, and is reflected back when they meet measured object.It can detect distance between the sensor and the measured object and then transmits to ships, buoys, underwater unmanned aerial vehicles, etc. As a depth sounder, it can also be used for underwater distance measurement.
The product protection level reaches IP68 level, and it can be soaked for a long time underwater 100 meters without damage. (Note that the cable outlet part of the instrument needs to be reliably sealed after wiring to avoid water )
2.Technical parameters：
Items | Technical Parameters | Image | |
Name | 1MHz plug-in underwater ultrasonic transducer |
| |
Model | PHW-1M-01F | ||
Frequency | 1MHz±5% | ||
Detection Distance | 0.05 ～ 3m | ||
Minimum Parallel lmpedance | 120Ω±20% | ||
1800pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：24Vpp、Distance:0.3m、 Echo Amplitude：600 mV | ||
-40～+80℃ | |||
≤3Kilos or 0.3MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:5°±1， Sharp Angle:12°±2 | ||
Housing Material | composite material | ||
Usage | ultrasonic flowmeter，submarine range finder | ||
See the product structure drawing | |||
Protection Level | IP68 | ||
Weight | 20g±5％（Length：1m） | ||
Wiring Instructions | integrated type：Red+，White-，Black: shielded wire； （without temperature sensor by default） | ||
Admittance Curve | Product Structure Diagram | ||
| |||
3.Temperature Sensor Schematic Diagram of Transducer , Test Circuit Schematic Diagram