1MHz Piezoelectric Ultrasonic Flowmeter Transducer for Doppler Ultrasonic Flowmeter
Product Description
1MHz Piezoelectric Ultrasonic Transducer for Doppler Ultrasonic Flowmeter
Technical parameters：
Items | Technical Parameters | Image | |
Name | ADCP ultrasonic transducer |
| |
Model | PHW-1M-01T | ||
Frequency | 1MHz±5% | ||
Detection Distance | 0.05 ～ 3m | ||
Minimum Parallel lmpedance | 15Ω±20％ | ||
4000pF±20％ @1KHz | |||
Sensitivity | Driving Voltage：24V，Distance:0.3m，Echo Amplitude：2.5V | ||
-40～+80℃ | |||
≤10Kilos or 1MPa | |||
| (Beamwidth) Half-power Beam Width@-3dB:2.4°±0.5， Sharp Angle:5.8°±1 | ||
Housing Material | composite material | ||
Usage | Doppler Effect ultrasonic flowmeter,ADCP | ||
See the product structure drawing | |||
Protection Level | IP68 | ||
Weight | 100g±5％（Length：2m） | ||
Wiring Instructions | White-，Black-, shielded wire；（temperature sensor is optional） | ||
Admittance Curve | Product Structure Diagram | ||
| |||
Block diagram of ultrasonic transducer :
Schematic Diagram of Temperature Sensor:
Split type Cable instruction:
Standard wire is 10M, signal will attenuate 6dB for each 50M increasing of wire.
1. Three core wiring instructions:
Red: transducer +
Blue: temperature sensor +
Black: public -
Ultrasonic Flow meter Application:
The Doppler Effect Ultrasonic Flow meter use reflected ultrasonic sound to measure the fluid velocity. By measuring the frequency shift between the ultrasonic frequency source, the receiver, and the fluid carrier, the relative motion are measured. The resulting frequency shift is named the Doppler Effect.