1MHz Mounted outside Ultrasonic Fuel Level Transducer for Oil Level Gauge
Product Description
1MHz Mounted outside Ultrasonic Fuel Level Transducer for Oil Level Gauge
Items | Technical Parameters | Image |
Name | 1MHz Ultrasonic transducer for tank oil level |
|
Model | PHW-1M-01FG | |
Frequency | 1MHz±5% | |
Detection Distance | 0.03 ～ 2m | |
Minimum Parallel lmpedance | 60Ω±20％ | |
Capacitance | 1500pF±20％ @1KHz | |
Sensitivity | Driving Voltage：24 V、Distance： 0.3m、 Echo Amplitude:300 mV | |
Operating Voltage | Peak Voltage＜150Vpp | |
Operating Temperature
| -40～+80℃ | |
Pressure | ≤10Kilos or 1MPa | |
Angle | (Beamwidth)Half-power Beam Width@@-3dB:3.3°±10%， Sharp Angle:7.8°±10% | |
Housing Material | 2A12 | |
Usage | Detecting oil level of fuel tank , submarine range finder | |
Protection Level | IP68 | |
Weight | 240g±5％（Length：5m+1m） | |
Wiring Instructions |
1: Transducer -; 2: Transducer +; 3: MF58 temperature sensing; 4: MF58 temperature sensing; | |
Admittance
Product Structure Diagram
Ultrasonic Fuel Level Transducer Application:
This ultrasonic fuel level detector uses the ultrasonic detection technology to measure the height of fuel level in container and output a standard electrical signal after through circuit processing. Ultrasonic sensors outer adheres on the bottom of the fuel tank and no need directly to contact with the fuel level that could be real-time detection the height of fuel level. It could be widely used in various types of vehicles for fuel measuring and monitoring, also could be combined with GPS/GPRS communication technology, through the computer software management platform to achieve scientific management vehicles, prevent fuel theft behavior and save the vehicle operating cost.
Application Image: