15KHz Long Range Ultrasonic Transducer 50M Range for Ultrasonic level meters
Product Description
15KHz Long Range Ultrasonic Transducer 50M Range for Ultrasonic level meters
Item | Technical Parameters | Image | |
Name | Ultrasonic transducer – Long distance measurement 50 meters |
| |
Model | PD-15-D50D | ||
Frequency | 16KHz±1.5KHz | ||
Detection Distance | 1.8～50m | ||
Minimum Parallel lmpedance | 1500Ω±20％ | ||
Capacitance | 12000pF±20％ @1KHz | ||
Sensitivity | Driving Voltage：520Vpp，Distance:0.6m， Echo Amplitude:1100mV | ||
Operating Voltage | Peak Voltage＜1500VPP | ||
Operating Temperature | -40～+80℃ | ||
Pressure | ≤3Kilos or 0.3MPa | ||
Angle | (Beamwidth)Half-power Beam Width @-3dB：12°±2； Sharp Angle：28°±4； | ||
Housing Material | Under the environment of weak acid and weak base（POM） | ||
Usage | Ultrasonic level gauge,Monitoring,Crashproof,Security
| ||
Installation Dimension | the bottom of screw thread M108×2 | ||
Protection Level | IP68 | ||
Weight | 2000g±5％ | ||
wiring instructions | Integrated Type：port（3PIN,2.54mm terminal）：Red+，white-，balck:shielded wire； port（3PIN,2.0mm terminal）： red black:temperature sensor line（MF58）； | ||
Admittance Curve | Product Structure Diagram | ||
| |||
Schematic Diagram of Temperature Sensor:
Integrated type Cable instruction:
1.Wiring instruction of transducer: interface (3pin, 2.54mm terminal)
Red: transducer +
White: transducer -
Black: shielding
Ultrasonic level meters Application:
The ultrasonic level meter is used to continuously monitor level channels in the height of liquid media, sludge or suspensions in both open and closed tanks and channels. The gauge generates the level-height information in the form of a signal current 4 to 20mA. The lower and upper limits of the measurement range can be set by potentiometers in the electronic unit of the gauge.
Application Image: